2. speakers
  3. 1155668152

Best subwoofer for a Wilson Puppy

I have now a Puppy 6 and am planning to upgrade to the Wilson puppy 7 + a subwoofer or the Wilson Maxx. But since my room is not to big and I can not finance the Maxx 2 yet I am thinking about buying the WP7 + a good subwoofer.

My slection so far:
1. Wilson Watch Dog
2. Velodyne DD18
3. Revel B15

Which subwoofer will be the best. I know the Wilson will fit the best but it is like 16000 US$ whicle the revel is 5000 US$ and the velodyne 4500 US$. The Velodyne sounds like a good buy but will it work with a Wilson speaker. Will it not be to slow for 2 channel.

I do not play movies and am only interested in a subwoofer for music. Which will be the best choise and who has experience with a good sub for a Watt / Puppy.

Peter
sprbggr
everest_audio
285 posts
 
In response to Rives, "...the Velodyne will not work terribly well. I worked at a client's trying to get that sub to integrate to WP 7s and could not. The issue was the crossover's lowest point was 40 Hz."

This is not correct. I'm a dealer for Velodyne Digital Drive subs and have had one in my system for quite some time. The low-pass filter is adjustable from 15Hz to 199Hz and you can adjust the rolloff from 6dB/octave to 36dB/octave in 6dB increments. There is absolutely no reason why a Velodyne Digital Drive sub can't be integrated with a WP7.

Not having tried the other subs, it is hard to say what will be the best match. There are some fantastic subs available.

Best of luck,
Neil
rives
953 posts
 
Neil:
We used the internal software and it would not go below 40 Hz. It was a DD-15. I read the manual and the owner also tried everything and 40 Hz was the lowest point. Had I been able to set it around 25 to 28 Hz it probably would have worked, but as it stood we had just too much energy around 35 Hz even at the lowest output settings. Is there some special way to allow the low pass to go lower, or did we have a brand new sub with outdated software from the dealer? I would very much like to know.
everest_audio
285 posts
 
Rives:
There isn't anything special that needs to be done to have the sub crossover below 40Hz. I'm not quite sure what was the problem in your situation. This isn't an issue that was addressed by a software update. It shouldn't have been a problem. That's strange.
goatwuss
877 posts
 
I also have had no problem setting my DD15 to low-pass below 40hz
fcrowder
191 posts
 
Perhaps I misunderstand, but you may be missing the point. I think that Rives is saying that regardless of the external or internal control setting, his test instruments showed that the Velodyne was not crossing over below 40 hz. This could have been a problem with that particular unit or a problem in general. The only way to know for sure is with appropriate test equipment. Given that Rives is not in the business of selling a particular brand of sub, their main interest must be in making the customer happy.
More to discover