Dynaudio C1 Bass

Goatwuss,

I've borrowed the radio shack spl from my friend. But I encountered some technical difficulties on using the meter.

1. Where can you find the cable for connecting the meter to the PC? It is basically a RCA to the PC mini plug.

2. I'm not sure how to setup the meter. For example, there are the 'Range', 'db' and 'fast/slow' settings that I couldn't figure out the correct combinations of them.

3. On the software usage, could you give me some quick tips or tricks as well.

Thanks a lot

Wilmak, what about the stands you are using? I heard same monitor speakers on different stands sounding very different, including the bass extension.
Dynaudio makes the stand, are you using it?

Hi Wilmak - Detailed instructions for using RoomEQWizard and setting up the meter can be found here:

http://www.hometheatershack.com/roomeq/wizardhelp/help_en-GB/html/index.html

Radio shack should have whatever cables you need

Goatwuss

I'm Wilmak's friend with the Radio Shack meter; can a stereo plug be used with the software ? I understand the phono plug on the meter is mono only

A pair of transmission line subs is what you need.
I had a pair of Dynaudio 1.8MKII's and built a pair for them.
The C1's really need a very good sub.
Maybe Ronnie at Carolina Audio could build you a pair.
carolinaaudio.com
There is no way around this.
Once you hear a good tranny sub their is no way to do without.

GTF