Down-firing Sub makes floor rattle

Yes, it makes sense. You sub rolls off gradually above 39hz, your main speakers roll off gradually below 56hz, and the combined energy from both speakers between 39 and 56 hz will equal the out put on either speaker alone at the roll off frequency. BTW, this assumes that the crossover network you are talking about is the one built into the sub. An outboard crossover network not specifically made for your sub might have different slopes and require different frequencies.

Shadorne's point about other sources of rattle and ways to cure it is right on. I had a framed picture on the wall rattle and I wasn't even being overwhelmed by the bass. Thought it was in the electronics/speaker. Put some soft materiel between its bottom edge and the wall to fix it.

Flrnlamb is also correct about the sub's drivers position not being particularily relevant.

update........lowered the crossover to 39hz, huge difference, sounds much better...also, kept it downfiring, but put the spikes on, also definite improvement...now just trying to fine tune the volume...gonna listen like this for awhile, then try to front fire...see what happens.....i really do like this sub and may just get another for stereo subs...what do you think?

An Aurelex foam platform should do the trick. This was very effective in taming the 160 yr. old sprung floors under my Vel DD-15.

http://www.auralex.com/sound_isolation_gramma/sound_isolation_gramma.asp

Turn the gain down.

And that's exactly the reason why for music one wants to get a front-firing sub with side radiators, something like Totem Thunder, for example.