2. speakers
  3. 1211480185

Which amp to Bi-amp my Maggie 20.1

I am considering bi-amping my Maggie 20.1s’ I have two amps, one has 1,000 watts into 4 Ohms and the other has 500 into 4 Ohms (both ICE amps). The Maggies are 4 Ohm speakers. I will be bypassing the low pass crossovers with an active crossover at 130 Hz. 15 dB/oct., but I will be sending a full range signal into the mid / upper crossovers to power the upper half. My question is should I use the 500 watt on the bass panel and the 1,000 to the upper so that I won’t risk clipping into the mids and tweeter? I don’t think clipping will damage the bass panels. Please don’t think I going to “blast” the sound at killer high volumes, the amps my never clip, it’s just that the Maggies are very inefficient. Also since I am bypassing the low crossovers doesn’t that make the bass panel easier to drive? So anyway please give me your opinions and reasoning over which amp goes where? Thanks.
koestner
puerto
372 posts
 
I agree with Rodman99999 - Use the larger amp for the mid and tweeter ranges. I recently read an article (wish I could remember where) that said that contrary to popular notion, the larger amp should be used to drive the upper ranges. I recently got a pair of 20.1s and would love to see some follow-up on this from you after you get hooked up. Trying the amps both ways is a good idea anyway.
eldartford
4,262 posts
 
Agree that, contrary to popular opinion, 200 Hz and up power measures almost as much as full range. I observed that raising the subwoofer X/O from 40 Hz to 200 or so (removing all that LF) caused surprisingly little reduction of power to the main speakers.
dob
577 posts
 
Spectron Musician III Signature monoblocks drives many Magnaplanars, good friend of mine has it with 20.1 and here is another review of the owner of 3.6

http://www.audioreview.com/mfr/spectron/amplifiers/PRD_412413_1583crx.aspx

All The Best
Rafael
mapman's avatar
mapman
22,739 posts
 
Try it one way, then switch, then keep switching until you can decide which sounds better to you.

I'm curious if there is much difference, i would expect either ice amp has the power and juice to handle either task very well.

My guess is that there is a significant difference, it will work better with the bigger amp on the low end.

But it really sounds like a win/win scenario to me regardless.
Post removed 
More to discover