Totem vs. Vr-1 vs. Dynaudio Audience


Hi all, I'm interested in your thoughts regarding the 3 speakers I listed. I've decided to upgrade from my current Michael Green Designs Rev. 60i to something better suited to my space and with better imaging. Right now it looks like I could get a pair of Rainmakers, Arros, Vr-1s, or Dynaudio Audience 52 in the $600-800 range, and am looking for some input.

The rest of my system consists of a Sony SCD-C222es mated to either an Audiolab 8000S or a B&K set up with a PT-II and an ST-2140. (Deciding which I like more, but generally leaning toward the Audiolab).

The room I'm in is L-shaped with the speakers being toward one side of the long wall. I'd guess it's about 300 sq feet.

My listening leans toward sax and vocal jazz and electronica (thievery corporation, zero 7, etc.) with some blues and alternative thrown in. Not really much hard rock or metal.

I'm tempted by the totems as they are close by, so I can audition them, and the arros are reputed to have phenomenal imaging. However, I am a bit worried about their lack of "meat." and they are a bit more expensive than the others.

Your thoughts are much appreciated.
tetazoo
I can't comment on the Dynaudio's since I haven't heard them.

The VR-1 is a nice little monitor that is on the lean and detailed side. It's also easily driver by low-powered amps.

The Totem Arro is the imaging champ, and musters a fullness that's surprising for a speaker its size. The Rainmakers have more fullness than the Arro's, but don't image quite as well.

If it were me, between the VR-1 and low-cost Totem's, I'd chose the Arro's. But a lot depends on your listening preferences and amplification.

Michael
Tetazoo,

If you like the Audiolab, you may want to try it with your speaker choice before looking elsewhere (if you have both amps on hand, perhaps can you take them into a local dealer or seller and give them a listen with these speakers before you purchase?) Since speaker/amp/wire relationships are fickle, somewhat difficult to predict precisely in advance, and occasionally surprising, this might help you out.

As for your current choices being "better" than the NAD or Jolida, don't let price or supposed place in the audiophile pecking order be the ultimate arbiters of "Goodness". Jolidas have a strong following on here, and the newer NAD's sophisticated solid state engineering and great sound if you like neutral-to-warm presentation. I would absolutely consider one of the Jolida hybrids, but their most powerful tube amplifiers are going to be more expensive and perhaps outside the suggested budget.

The ironic thing about smaller speakers is that they usually sound best with LOTS OF POWER on tap to start and stop those little drivers at the end of their excursion as they work to move lots of air. I don't know about the C352/C355 line, but Stereophile measured the old C370 integrated at 34 amps of peak current and the new C372 at 39 amps. Compare that to the Audiolab's reported 25 amps. The NADs current capacity combined with the general praise both these amps have received for sound quality tells me that these are good values and powerful enough to grab hold of and control most any mid bass/woofer out there. My biggest problem with the NADs is that their cabinets look and feel a little cheap - which they probably are in order to provide their level of audio performance at that price point.

I don't know where the B&K set falls in this current race, but I would guess the ST2140 has much higher capability than the Audiolab. B&K components are competent, but my experience is that they tend towards the analytical as opposed to the musical side of the spectrum.

All of these amps discussed above are in my mind squarely in the mid fi range of cost and performance. In contrast, I think the Naim and PrinaLuna amps fall pretty much on the low end of real hi fi (if this is a difference with a distinction), representing the best thinking and execution of reasonably priced solid state and tube integrated designs, respectively. Since these are fairly popular and hold their value, it might be difficult to find one of these in your price range - but I mention them again just in case.
This thread may help sort out the amplification issue if you choose to go with the Arros.

http://forum.audiogon.com/cgi-bin/fr.pl?aamps&1203546480&openflup&2&4#2
Update --

So I auditioned the Arros for quite a while. They are leaner sounding than my Rev. 60i's, but they have enough low end to get by.

And, true to what everyone says, they image very well. The soundstage is incredibly deep and they really do disapper, BUT (and it's a Sir-Mix-a-Lot sized but) they are BRIGHT. The upper treble range is loud, harsh and etched, to the extent that it dominates anything else in the recording and makes music sound like a collection of parts rather than a whole.

I've tried a variety of set-ups to see what happens, but the outcome is always the same -- Audiolab 8000s, B&K PT-3 and B&K St2140, Trends 10.1, and a Yaqin/Grant Fidelity Tube Buffer in every mix and match combo one can think of.

I've tried switching cables and even hauled the arros to my buddy's place to listen with his Sonic Frontiers Line 1/Bryston 4bst combo.

In the end he and I concluded that we liked what the arros did, just not the sound with which they did it.

I'm ready to give the arros back now. I'm going to miss the depth, but not the harsh treble. Did I miss something (short of trying something like a Jolida, Unison or PrimaLuna)?

What do they sound like before they get broken in? Could this be the issue?
I am very fimiliar with the Dynaudio sound. I had the Audience 72 and if you don't want an on the bright side treble look elswhere. The VR1 may have the best balance for you.

Blessings, Bob