I need some speaker help

Line arrays might also work.

I agree with the first two posters. From the damage you are sustaining, it sounds like you are clipping your amp and need more (clean) power. Amplifier clipping will take out tweeters(and/or x-over caps) regardless of the brand/quality of the speaker system.

Addendum: Yes- The alternative is a much more efficient speaker system. But at 92db/1w/1m the DT 7002's are already fairly high efficiency. How big is your listening room? With 200wpc and 92db efficiency you should able to generate some fairly high SPLs.

I'm willing to spend the money for the right set of speakers that will hold up to Joe Bonamassa crankin'.

You need clean amplification and spreakers with pro drivers (not consumer speakers with northern european mass produced drivers). Horns with TAD drivers and woofers or ATC or PMC or Meyer or Westlake speakers.

It is not well known (as there are no specifications for it) but consumer speakers will compress relatively quickly (Xmax and thermal compression limits how loud they can play). A typical pro driver will typically play 6 db louder than the very best Excel consumer woofers without any hint of compression. Once you have a design with all pro drivers then it boils down to just a BIGGER BOX and more large woofers to get you were in SPL you want to go. (Note that because consumer designs are not intended to play loud then the tweeter and mid range are usually not capable of going loud either - so it is NOT as simple as adding several JL F113 subs as you will still get compression and faliure from tweeters and midrange. A pro design will use a waveguide to assist the tweeter down low and it will tend to crossover the tweeter higher in frequency so as to limit its excursion when playing loud)

I saw Joe Bonnamassa wednesday and he was great but extremely loud.