2. speakers
  3. 1441147503

Dynaudio or Ohm?

I’m close to purchasing a pair of Dynaudio Focus 260s except I keep finding threads about Ohm speakers which have me intrigued.
I’m looking for anybody who’s familiar with the Dynaudio Focus sound and has owned a pair of Ohms.
My living room is 16’ x 14’ x 8’ and has a side wall with an opening to the dining room. It is very well damped and acoustics are very good; I listen nearfield about 8’ from the speakers. (I would need the T-2000). The components in my system are:

ARC CD3 MKII
Rogue Perseus Magnum with Mullard Longplates
Sunfire 300 amp
Purist Aqueus Luminist speaker cables
Cardas Parsec ICs

The attributes I find so appealing with the Focus 260 are clarity with smooth highs and a liquid midrange, wide soundstage, transparent with a touch of warmth, and deep detailed bass.

The concern I have regarding the Ohm are the overwhelming reviews of the disappointing or only “adaquate” build quality.
I listen to 90% Classical, so I do like hearing what people have to say about the sonics of these speakers; eg, soundstaging and imaging. I just wonder if they are in the class of the Dynaudio; by that I mean are these speakers that people hold on to for years as they update their electronics, or do they move up to higher end spkrs after a couple of years.

I’d like your input before ordering a trial set of Ohms; I’m finding it hard to believe they measure up to the $5000 Dynaudios.
Any advise is appreciated.

128x128lowrider57
lowrider57's avatar
lowrider57 OP
5,417 posts
 
Thanks for offering your experiences, Joefish. The Ohms probably make your room sound bigger than it's physical size.

I like your description, similar to Mapman's. That's interesting that the distance of the image changes with low volume.
I'm very glad to hear the build quality is solid; and I've spent quite some time on the website.

You mentioned a subject that I've been wondering about, control of the bass. Can these speakers get a tight, detailed bass with only a flat plinth sitting on the floor?
How is reverberation and coloration thru the floor controlled? My room has a hardwood floating floor...is there an option to use spikes?

Many thanks for your input.
jmlm
42 posts
 
I think your characterization of the Dynaudio 260 is accurate: it is a great all around speaker that should be easy to position in your room. I have heard Shahinians, but not Ohms. I liked the Shahinians for Orchestral Music, and to fill a bigger room, but thought the imaging was less precise for smaller ensembles. For Orchestral music, a subwoofer would be useful with the 260s. I am a Dyn fan, but you should listen to as many speakers as possible to avoid buyers remorse with a $5k investment.
mapman's avatar
mapman
22,198 posts
 
Both of my OHMs (100S3 and F5) are older refurbed cabinets with no plinth underneath.

Floor interactions are not unqiue to bottom ported OHMS butsomething to take into account.

I use Auralex Subdude isolation platforms under my 100s to manage floor interactions with a floor similar to yours.

FWIW floor interactions proved to be a similar problem for me with other conventional monitor speakers on even heavy quality spiked stands in other rooms on that floor as well, so an issue to get a handle on but not necessarily unique to OHMs. I use isoacoustics pro monitor stands under my small Triangles in that other room and those turned out to be the only stands that worked well enough in there.

Nothing needed under my large F5s in teh basement on carpeted concerete foundation, which served as my reference for getting things on teh upper level under control.

In the end I learned that managing floor interactions is a big key to getting the best sound.

Of course there are many factors that affect room acoustics, floors being only one of them, so each case will be unique and may call for a different approach or in some cases even nothing special at all.

New OHm Walsh cabinets have a plinth built in underneath whereas neither of my OHM Walshes do so that should make for some difference. Others might be able to comment further on those.
martykl
3,578 posts
 
Most of the main issues have been covered here and I don't really know Dynaudio. So, forgive me if this is a bit redundant, but at least it's one more data point for you...

I use Ohm 100s and I'm pretty sure that the spatial presentation will be the make or break issue for most listeners. That's not possible to qualitatively recommend to anyone - you just gotta hear it for yourself and make a call.

The 100 is close to dead neutral IMO and has limited deep bass capability. Further, like a lot of modestly sensitive/efficient loudspeakers, dynamics can be understated at modest listening volumes. The net effect is a "polite" presentation at low SPL. I use a pair of subwoofers with my Ohms which seems to help address all of these issues. As a true full-range system (integrated and crossed in the digital domain via Audyssey), this is IMO a ridiculously good sounding system for the $.

BTW, I also own SF Cremonas, Verity Parsifal/Encores, and Merlin VSMs (as well as Maggie MMGs for use with the same subs as the Ohms). The Ohm/sub system is my loudspeaker of choice for 80% of my listening and 100% of my orchestral listening. FWIW.
lowrider57's avatar
lowrider57 OP
5,417 posts
 
Martykl, the fact that your Ohm's SQ can compete with your collection of such fine speakers says a lot. (btw, I believe Merlins use Dynaudio drivers).
It's also good to hear another recommendation for listening to orchestral music on the Ohms.

I'm thinking the T-2000s in my room should supply an ample amount of bass.
Your post is much appreciated.
More to discover