This conductor type is only found in the flagship interconnect Grandmaster by taralabs,also, their is a new dielecteic and conductor out lay positioning that no other cable has by taralabs, Making Sense of….Gen 3 Conductors
TARA Labs, Inc. has just announced the introduction of its Generation 3 Rectangular Solid Core® conductor, to be used exclusively in its state-of-the-art interconnect cables.
TARA Labs claims that the Gen 3 conductor has an increased bandwidth or high-frequency extension, that makes it unrivalled in important test measurements and listening tests.
TARA Labs’ Matthew Bond said that the new Gen 3 conductor has the same current-carrying capability of a 28 gauge conductor but has the high frequency linearity of a 40 gauge conductor.
Matthew Bond explains why this is possible. “In a conductor with a rectangular profile, there is a huge reduction of ‘flux-linkage’ or ‘coupling’ of electromagnetic lines of force. These lines of force are created as the signal (music) passes through any conductor.” Bond said further, “In a round conductor there is a large center that tends to roll-off or attenuate much more of the high frequency information … this does not happen in a Rectangular Solid Core® conductor”.
According to Matthew Bond, the new Gen 3 Rectangular Solid Core® conductor is smaller than the current Gen 2 conductor used in most of TARA Labs’ audio cables. The Gen 2 conductor measures approximately 25 thousands of an inch wide and 12 thousands of an inch in height. Bond says that the Gen 3 conductor is about 66% of the size of the Gen 2 conductor, and that it is Super-Annealed™ to increase its conductivity.
Both the Gen 2 conductor and the smaller Gen 3 conductor are said to be Eight-Nines™ pure copper, which is 99.999999% pure. TARA Labs’ trademarks for this technology are 8N™ and SA-OF8N®. SA-OF8N means Super Annealed – Oxygen Free 8 Nines copper. According to Bond, the term ‘annealing’ refers to the method whereby a conductor can be made softer and more conductive.
