Elrog 300B vs Takatsuki 300B tubes

Markus,
Have you discussed with George the option to change your cathode resistor from the stock 1K ohms to the recommended 1.2K ohms value. They are said to reduce the initial power surge (current) stress on the output tube.  The Elrog engineers believe that this is issue with the Frankenstein amplifier. I've done this modification,  only timewill tell if this is the answer. 
Charles, 

charles1dad,

I haven't discussed the cathode resistor change with George but it does sound like a feasable fix. Problem for me would be that in my neck of the woods there aren't any tech's that would understand, unfortunately. I honestly thought that the engineers at Elrog had fixed this problem. It's that old saying about assuming something.  

Hi Charles,
Now that you have more hours of listening, did changing the resistor degrade the sound in any way using the EML XLS's, Taks, or Elrog's?

Best,
Joe

Hi Joe,
I don't hear a difference in sonic character at all and I was really listening intently for any changes. So, none that I have noticed. 

Markus, for a tech this is very simple and straight forward. The resistors are right there and very easy to remove and replace. It took my friend 5 minutes per mono block to complete the job. Fortunately the Frankenstein is easy to work with,ample space and few  parts (very uncluttered ). I used Munford 1.2K ohms/25 watts,  2.50 dollars each(1 resistor per mono block ).
Charles, 

Mundorf not Munford, darn auto spell!