Wait--phono OUT from preamp? You mean you're running the TT into the MC input of the phono stage, and the phono stage into an input of the preamp, right?
Newbee help- Volume low even at full preamp volume-???
Guys- my first turntable- Dr. Feickert Firebird- arm- TTW jelco- cart Charisma MC-2: Specs-
:Cartridge Weight: 12 gCartridge Body: aluminiumCantilever: sapphireStylus: super fine line contact nude diamondVertical Tracking Angle: 20 degreesCoil: pure iron crossed-coil with single crystal high purity copperOutput Voltage: 0.42 mV at 3.54 cm/sec. Internal Impedance: 14ohmsFrequency Response: 20 –25,000 Hz ± 1 dBChannel Balance: better than 0.5 dBChannel Separation: better than30 dBDynamic Compliance: 10 um/mNRecommended Loading: 100 –1,000 ohmsRecommended Tracking Force: 2.0 g ± 0.1 gTracking Ability at 315 Hz / 2 g: 80 uMRecommended Tonearm Mass: medium
Phono preamp- Rogers PA-1A
Preamp- Wyetech ruby-
Ok- I set the Rogers Phono Pre per Charisma rec.-"We would suggest you to try the 100 Ohm and 10K Ohm of the resistive selection. Capacitance is sensitive to moving magnet cartridges, but not moving coil."
I get very low volume even with the Wyetech preamp at full volume- Please help a Newbee out- What am I doing wrong??thanks gary
:Cartridge Weight: 12 gCartridge Body: aluminiumCantilever: sapphireStylus: super fine line contact nude diamondVertical Tracking Angle: 20 degreesCoil: pure iron crossed-coil with single crystal high purity copperOutput Voltage: 0.42 mV at 3.54 cm/sec. Internal Impedance: 14ohmsFrequency Response: 20 –25,000 Hz ± 1 dBChannel Balance: better than 0.5 dBChannel Separation: better than30 dBDynamic Compliance: 10 um/mNRecommended Loading: 100 –1,000 ohmsRecommended Tracking Force: 2.0 g ± 0.1 gTracking Ability at 315 Hz / 2 g: 80 uMRecommended Tonearm Mass: medium
Phono preamp- Rogers PA-1A
Preamp- Wyetech ruby-
Ok- I set the Rogers Phono Pre per Charisma rec.-"We would suggest you to try the 100 Ohm and 10K Ohm of the resistive selection. Capacitance is sensitive to moving magnet cartridges, but not moving coil."
I get very low volume even with the Wyetech preamp at full volume- Please help a Newbee out- What am I doing wrong??thanks gary
- ...
- 20 posts total
- 20 posts total