2. analog
  3. 124755-2483

VPI TNT Turntables

Many years ago I owned a VPI HW-19 Jr turntable + Sumiko Premier FT arm, which I soon replaced with a Merrill Heirloom + ET2. After may years of digital reproduction, I wish to go back to analog reproduction and I would like to buy a VPI TNT with, again, the ET2 arm. Unfortunately (or fortunately), many models/upgrades exist for TNT. Therefore, I would be very grateful if some experts of TNTs could describe the sound/performance variation from TNT Jr to most recent ones so as to help me in my choice. 

Thank you very much!

Luca
luca58
abnerjack
204 posts
 
phoenixengr,

The Hurst motor on my Classic One started making noise within a few months after I started using the table.  I installed a replacement and it wasn't smooth right out of the box, but has since smoothed out.  I doesn't inspire confidence.  The BLDC motor sounds promising.  Do you know where one could be purchased?  You mention that yours in custom; does that mean that your standard psu/tach would not work with a BLDC?
phoenixengr's avatar
phoenixengr
92 posts
 
I bought the motor overseas;  it has a 4mm shaft (the Hurst motor is 3/16") so I had to have pulleys made as well.  The PSU is also a prototype and very different design than the Falcon or Eagle, although operation is the same and it works with the tachometer.

Right now, I have no interest in developing it commercially.  I built it to investigate whether it would work better than the Hurst motors, and it turned out better than I could have expected, so mission accomplished, but also, mission complete.
don_c55
1,025 posts
 
I like the VPI TNT motor and find it has very low vibration.

I bought a spare, in case it can not be repaired.

phoenixengr - You have issues with Harry of VPI, because he did not distribute your products, and your grudges show up here, and on AA.
phoenixengr's avatar
phoenixengr
92 posts
 
Actually, I have a problem with Hurst motors, but thanks for your unbiased opinion.

BTW, the motor in your TNT table is not a VPI motor;  it is sold by Hurst and manufactured in China.
don_c55
1,025 posts
 
The VPI Scout and many VPI turntables that have the motor in the plinth, send vibrations throughout the turntable.

The heavy TNT motor using the "VPI designed" motor case, mounted outside the plinth, does not send vibrations throughout the turntable.

The motor should never be in the plinth IMO, that is a cheap design!
More to discover