And I convinced you to do this without explaining the major part of the upgrade! :)
Please be careful opening up tube gear. Voltages inside are LETHAL at 300V or higher. This is different than solid state, that is rarely over 15V for a preamp, 60V-ish for an amp.
Turn it off, unplug and let sit for about 10 minutes to ensure caps are fully discharged before poking around inside. :)
Best,
Erik
Please be careful opening up tube gear. Voltages inside are LETHAL at 300V or higher. This is different than solid state, that is rarely over 15V for a preamp, 60V-ish for an amp.
Turn it off, unplug and let sit for about 10 minutes to ensure caps are fully discharged before poking around inside. :)
Best,
Erik