Running a sub in 2 channel with dhc80.2

I assume that you're using Audyssey. If so, there shouldn't be any issue.

When I set up my Onkyo 5508 (a near twin of the 80.2) I found that Audyssey would auto detect the set-up. It asks you to identify the sub or subs, then pings each of the other potential (side, rear, height, etc.) channels for level set and EQ. When the test mic produces zero response to the set-up ping for any given channel, Audyssey assumes that there are no speakers active for that channel. At the end of the process, it will show 2.2 for left/right with two subs or 2.1 for left/right with one sub.

Marty

What's up with the 'drive by' requests for help and no follow up?

I was thinking the same thing. Happens on the Klipsch forum all the time.

Similar thing happened to me twice this last week when potential buyers emailed me several times about a couple of amps I am selling asking questions and requesting photos. I have emailed them three times each in the last three days to see if they are still interested in the amps. I just don't get it. A follow up email "I am no longer interested" would suffice. Or in the case of this thread, "thanks for the help" would work.

Bill

Im sorry for the late response... I ran into some family trouble and have been out of the country for the past month. sorry what I meant was when I am running in stereo I cant seem to get the sub to run. IT seems I have tried everything to no success. I do really appreciate the help by the way.

PS. I have the sub hooked up with a single ended sub cable. When I try to run it in stereo I only get the mains without the sub. There is no option to turn the sub on in stereo as there is with the onkyo equivilent. I am just wondering if there is something I am missing. I have read the manual and have found nothing regarding this. I hope that makes my problem a little more clear. thanks again for any help.