Running a sub in 2 channel with dhc80.2

I checked your manual - for the "Direct" mode there is a footnote that basically says (if I am reading right) - the number of channels being played (including the subwoofer) depends on the number of channels in the original source.

So, at least for Direct, if there are only two channels for an 'old fashioned' stereo LP or CD, then that's all you get - two channels and therefore, no sub.

Maybe they forgot that footnote for "Stereo" mode?

I just noticed when I press the display button on the remote it comes up as stereo output: 2.0. It looks like it may be impossible to play a sub in stereo with the integra. I appreciate the help. If you happen upon anything in the future please post it in this thread and I will look back in here from time to time. Thanks again for the help

There are several popular and active 80.2 forums on the Internet - I would google them and post your question. Another option would be to call the manufacturer of your sub and also integra Tech support.

I have an 80.2 as well as a dedicated 2-channel system and run the sub from my preamp, which also has a cinema direct setting so that I get 5 channels plus sub for movies as well.
There should be a way to solve your problem - I have a hard time believing it will work with Onkyo but not Integra..

Good luck.

In the speaker setup menu, if your fronts are set to full range, with stereo mode you may not get the subwoofer to play unless you selected "double bass"(I think that is what Onkyo calls it).

Bill

Sorry for the late reply once again. Bill, you were right, once I turned the mains to 40 htz cut off my sub plays. I guess I should have tried this before but with my old onkyo I could have it set to full range and still have the sub play. I really appreciate all your help guys as this was driving me crazy. Thanks again

Steve