2. amps-preamps
  3. 127313-4976

looking for a quality integrated that allows for bypassing of the preamp section

In a simple A/V 2-channel system, I run an Upgrade Co. modded Oppo BDP-83SE directly into my amp, which is currently a Cambridge Audio 840W.  I prefer the extra detail and transparency that going preampless offers but occasionally find the output on some movies too low, even with the volume full up.  I've thought about getting a simple preamp (Parasound zpre) and connecting just for those hard to hear movies but that seems like a real hassle.  Also considering a Creek Destiny integrated that allows for either passive or active preamplication but may need more power than the Destiny offers.  Perhaps the simplest solution would be an integrated that has the inputs that allow one to bypass the preamp and use the integrated solely as an amplifier (what's the term for this input?).  What feature would I be looking for and could I get some recommendations up to $1500 used?  Many thanks.
lcherepkai
lcherepkai OP
278 posts
 
paraneer----might there be a list of integrateds that allow you to disconnect the preamp from the amp section via jumpers?  Thanks again.
paraneer's avatar
paraneer
818 posts
 
might there be a list of integrateds that allow you to disconnect the preamp from the amp section via jumpers?
There may be but that feature isn't really HT Bypass. 

The purpose of HT Bypass is to turn an integrated amp into a power amp with the push of just one button and controls its volume from the a remote surround processor.  Bypassing the integrated's preamp section.  And then go back to the integrated's preamp by pushing the same button again when playing a source connected to the integrated.

No changing cables each time you need to use a different preamp but want to use the integrated's power amp section full time.
tls49's avatar
tls49
1,351 posts
 
"The purpose of HT Bypass is to turn an integrated amp into a power amp with the push of just one button and controls its volume from the a remote surround processor. Bypassing the integrated's preamp section. And then go back to the integrated's preamp by pushing the same button again when playing a source connected to the integrated."

Not all on the list function that way. Many just have a direct amp input and the only way to change is disconnect cables. If you can't find an integrated with enough power that has HT bypass via button push or menu selection, then you might try looking for a preamp that switches between active and passive.
lcherepkai OP
278 posts
 
I don't mind switching the one pair of interconnects from an input to the direct input to the amp (I've seen this on some of the bigger Chinese muscle integrateds).  The big Shengya and Xindak come to mind but these just never seem to be available on the used market and going through Cattylink means getting them in 220, 230, or 240 v thus the need for a step up/down converter.  That's not a deal breaker necessarily.   Even using the HT bypass, I'd be switching that 1 pair of interconnects between that input and an active one as I'm going direct from the Oppo to the amp with the 2 channel outputs and I use the FRONT outputs from the Oppo to drive stereo subwoofers.  I would prefer not to ad a preamp though as that would require 2 cables swaps each time I went from preamp-less to using the preamp.  Thanks.
czarivey
5,772 posts
 
Vintage Accuphase 202 would be my choice.
More to discover