Synergistic Red Fuse ...

dlcockrum
I hope what you stated concerning black fuse break-in is not true for me. The first 5 amp pair I used sounded great from 2.5 to 12/13 hours until they blew. I just received 8 amp fuses and played them for 4 hours. They sound great. When you said fourth day, does that mean running your equipment on for four days or 96 hours continuously? I won’t reach running my equipment for that amount of time for maybe 6 weeks. I don’t want to leave my amps on continuously for that long. Based on your comment will I I be suffering bad sound for 5+ weeks or just 4 days?

I did not have that experience with the black duplexes. On one system it sounded good and got better over a week. The other sounded awful to start, mediocre at 30 hours, broken in sounding at 150 hours.  As to the Teslaplex SE duplexes, the three I installed sounded great at inception and got somewhat better over time.  They never sounded worse over break-in.  They were replacing 22 year old medical grade Hubbles.

Hi fleschler,

These are my experiences and they are real in my system and room.
Other’s have stated similar observations with SR’s power products, including Ted Denney III and Eliott Nommensen of SR as well as any reviewer that has written about them.

I have been using SR’s cords, cables, receptacles, and Powercells for about 7 years now and have always found that, when new, they undergo a initial period of sonic unpleasantry before settling in. I always suspected that this was due to the Tesla-coil zapping that started with the Tesla line, but I find that even disturbing the SR active-shielding cords, cables, and MPCs requires an overnight settling period. Made it really tough to compare their different cables and cords during the brief trial period of the "free-loaner" program offered by SR dealers prior to the more recent 30-day money-back trial period offer. I have been told that the new Atmosphere Graphene power cords are even more sensitive. Maybe Frank will write on his experiences with his Atmosphere power cords...

I will say that the effects of the Black fuses were much less pronounced in my amps, both in terms of the break in anomalies as well as their ultimate benefit to my system’s sound. YMMV.

If your amp is SS, it won’t hurt a thing to leave it powered up for a few days.

I’m confident that it all will work out for you either way, but expect that you will hear differences/improvements once the fuses and receptacles are undisturbed for a few days or longer.

Best to you fleschler,
Dave

David Prichard ....

Its wonderful to see your return David.

The best to you and your Mom. She's a very fortunate woman to have a son such as yourself, David. So many children of our advanced Seniors won't expend the time, finances or energy until the time comes when its too late.  That's when one of the Universal Laws dawns on them ... and that is that discipline weighs ounces and regret weights tons. 

dlcockrum ...

On the SR Atmosphere level III PC's ... They replaced some very highly regarded PC's that were in the system for about five years or so. Initially, the SR's gave an overall improvement.  Then, just like the Black fuses, I heard the abnormalities. 

I started a thread in the A'gon cable forum regarding the SR Atmosphere PC's. Here's the link:

https://forum.audiogon.com/discussions/synergistic-research-atmosphere-power-cords

Since adding the SR Atmosphere PC's to the system, and a few months after attending the Newport show, I acquired a pair of Von Gaylord "Return of The Legend" speaker cables and two Von Gaylord "Return of The Legend" IC's.  The combination of the two makes of cables in the system was a real match made in musical heaven. 

For those of you not familiar with Ray Leung, the designer of the Von Gaylord products, I can tell you that he's a real gentleman and a genius of a designer. I was completely blown away by the natural tonal balance and the overall sound in his demo room at the show. Here's a link to his site:

http://vongaylordaudio.com/beta/

Here's a link to Ray's cables:

http://vongaylordaudio.com/beta/cabling/

Yes, expensive stuff ... but just like the SR products, with Ray Leung's "Return of The Legend" products you definitely get what you pay for. 

Frank

I don't know if I still need to replace the remaining 2 rail fuses in my amp.  My system has never sound so good.  Like what Frank said, I just don't want to leave home and play one song after another.  It doesn't just make sound but it makes MUSIC!  Not sure if it was the copper that I stripped off from the outlet, the new SR black outlet or the 2 black fuses that I put into my amp.  I will probably take the fuses out once they are fully break in to find out how good the outlet really is.  The first day sounded really bright and loud.  The second day was worst, vocals sounded horrible.  It was like trying to sing when you have a cold.  I hate that sound.  I expected the break in period to be longer but now it sounds really good already.  I am not sure if it will get even better.  Also, I thought I was just going to get more bass and better soundstage from what you guys were saying by installing the SR black outlet.  I did not expect to get increase details, better dynamics, more 3D sound and most important of all it is more musical now.  I have a feeling this effect will get magnified as you add more fuses or other SR devices to your system.  Just my 2 cents and I want to go back to listen to music now:)