Synergistic Red Fuse ...

  Those of you who are fuse doubters have again come around to tell us we are suffering from mass delusion during our listening evaluations. Let me assure you--our experience of enhanced clarity and presence is based in a perceptual reality well within the margins of the lunatic fringe you enjoy placing us in.  Perhaps an important reason why we hear these improvements and you have not, if you have even tried, is that you must have a system supplied by a generous and quiet power supply and components served by ultra pure conductors.  Components, whether of mid or hi-fi quality, must be thoroughly isolated from mechanical vibrations to provide further clarity of sound.  Along with room improvements, the system containing better fuses and that is supported in these ways will be lifted to perceptive improvements unmistakeable by even you, but these fundamental things must be done right.  In these times of fake news, there is truth found right here, on this thread, told by many fellow audiophiles who don't make a habit of spreading fakery, rather, they appreciate hearing the positive results others have experienced when using better fuses. My best wishes to you in finding that truth.  

Uh...right…although it has been claimed by premium fuse Athletic Supporters that the wonders of SR fuses can be realized in even crappy gear. That’s right. The wonderfulness is always there because it’s baked in…"lifted to perceptive improvements unmistakable by even you." Yeah man, EVEN YOU…no not you…but maybe you…although not me. I guess my components aren’t being served by ultra pure conductors except maybe Pierre Boulez, although you can’t really be so sure even about that guy, although conductors are generally directional.

I would think if there was any danger of the fuses damaging the equipment neither Steve Deckert of Decware nor Paul McGowan of PS Audio would recommend them in their products.

This reminded me of a conversation I had with the folks over at Ayre several years ago about some of their equipment I owned.  As a major manufacturer of audio equipment in the USA, Ayre is well-known for both their consistent design philosophies and for the importance they place on listening tests in the final "voicing" of their broad range of products.

We were discussing "audiophile" fuses and I was told their internal discussions had yet to define how they might respond to the warranty coverage of their gear, if damage was determined to have occurred because the equipment was not adequately protected by such fuses.  At that time, I remember discussing that the concern was related to the lack of testing and potential consistency issues with the aftermarket fuses, compared to the tried and true Bussmann and Little type fuses.

To be clear, I have no idea of Ayre's current viewpoint on aftermarket or audiophile fuses.  Based on the quality of their equipment, I doubt a small variance in fuse value would put their equipment at risk and, based on the quality of their reputation, I suspect they may very well cover damage to their still-under-warranty equipment, even if an aftermarket audiophile fuse was used, with the exception of gross negligence.  The point of this post is that, even a few short years ago, a top manufacturer not only did not embrace the use of audiophile fuses in their gear, but showed some concern for the suitability of such fuses to do the job intended.

OTOH, and in fairness of an opposing viewpoint, I have done several projects with Steve McCormack, another well-respected designer of excellent sounding electronic equipment, and he embraces the differences/improvements he hears from audiophile fuses and includes them in his products.  In my experience, he does not recommend just one type/manufacturer, but instead has determined that different fuses can work best in different locations within the equipment (i.e., line fuses vs. rail fuses), so he uses the fuse he believes sound best for the specific application.

Jafree enjoy your stuff but don’t forget that opinion is neither fact nor news and definitely not universally accepted truth about any particular fuse product.

For example its been pointed out multiple times by others how merely changing or reseating a fuse and improving the contact as a result can have a perceivable effect.   Having examined fixed or changed many a fuse for customers  in  year's past I can vouch for that easily.

Also there are many who do not spread fakery but there are also others who unquestionably do.

I have no problem with people who hear a difference or like the fuses for whatever reason. I have problem when they assert things as truth however as a result meanwhile discounting or denying other assertions that challenge the case.

Asserting things that are questionable as truth is a common marketing ploy used to influence people to buy. That’s a pretty safe assertion that cannot be discounted don’t you think?

Thus spake the lead junior associate troll.

😛