Recommendations for spade lugs for 14 ga conductor?

Some like minimalist spades.  Below are a couple of links to the Vampire SPD spade, which is solid copper with gold plating.   Made for 10-12 awg but should be fine to crimp your 14awg Canare.

BTW, not sure if you are thinking of internal bi-wiring your Canare wires but I would recommend cross-connecting them instead - i.e., connect the two wires across from each other together at each end so two wires go to positive and two to negative.  If you need to bi-wire, do the same again and run a second cable.

http://http//www.partsconnexion.com/product15241.html

http://http//www.soniccraft.com/product_info.php/vampire-spd-spade-p-1515

AudioQuest and don't look back.

I am very happy with the AQ BFA connectors recommended above on my speaker cables... they provide a very secure fit.  For my REL sub, I got the SL-1 Universal Spade Lugs from LAT International for $12/quad.  They are copper and crimp style.   Cheap and cheerful!  

Correct me if I am wrong, but the 4S11 is not just 14 gauge, each wire is 14 gauge X 4.

Assume you will be cross connecting two wires as mitch points out above and connecting the two in one spade. 

Your first statement is correct.  I only need three of the four conductors to hook up my powered REL sub.  One conductor, one spade connector.