It shouldn't as long as both are properly crossed over. The portions of the transformer's operation that are out of band with the crossover will see a fairly high impedance which will be transformed to a high impedance to the amplifier. Worth a try- you can't hurt the amp with an adverse load BTW. But I really doubt that it will yield much in the way of an improvement. OTOH, I don't know of anyone whose tried this, so report back :)
Amps Atma-Sphere M-60 Mono blocks OTL design
I just purchased a used OTL Atma-Sphere M-60 mono blocks that I have sent to Atma-Sphere to be upgraded to the current model 3.3 and I also added the option of a higher quality power supply and V caps.
I have sold my old trusted Eggleston Andra 2’s speakers and have built some monitors using Aurum Cantus ribbons (102db) and Aurum Cantus midwoofers (90db) that are both rated as 8 ohm nominal. I have a DEQX Premate and will be crossing over to (2) JL Audio F-113 subs at 80hz.
Currently I am using a solid state high power stereo amp (Pass Labs) that I used with the Andra 2’s.
The Atma-Sphere M-60 is rated at 60 watts class A and is said to work better with higher impedance loads.
It will probably be a few weeks until I get the M-60 and was hoping someone could provide opinions of what to expect.
I listen to late 60 early 70’s classic rock music mostly. Sometimes loud.
ozzy
- ...
- 245 posts total
- 245 posts total