2. analog
  3. 130213-5377

Vintage DIN phono cables, any good?

The question is about old DIN tonearm phono cables for the top of the line vintage Japanese tonearms. 
I wonder how good those old cables are compared to the mid priced new cables ?

For example an old Audio Craft, SAEC, Fidelity Research, SONY  cables made for their top of the line tonearms are good? It's easy to replace an old RCA connectors, but what about the cables? Some of them are silver and must be a good quality. 

Any thoughts? 
Thanks 
128x128chakster
lewm
13,110 posts
 
The Kenwood L07J tonearm on my L07D turntable pretty much mandates that you use its supplied cables, because of the one-off connector built into the base of the L07J.  Inside is what Kenwood deemed to be state of the art Litz-type wire, in around 1980.  It certainly seems OK, but I plan to bypass the whole shebang by running wires from the phono direct to the cartridge.  I never did care much for Litz wire; it tends to homogenize the sound so everything is "nice".
karl_desch's avatar
karl_desch
437 posts
 
Interesting question.  I just purchased a FR-64S from the original owner who still had the straight DIN RCA cable. I will listen to it compared to the my Audioquest Leopard cable.  
lewm
13,110 posts
 
FWIW, I use an aftermarket DIN to RCA phono cable on my FR64S with solid silver wiring.  My FR64S has the "silver inside" decal, so I thought it would be interesting to go all the way with silver.  An eBay vendor sold me the wires for a very reasonable price.
chakster's avatar
chakster OP
6,144 posts
 
The old (original) cable of my Sony PUA-7 tonearm was dead quite with low output MC, better than more expensive new phono cable. That’s why i think for the top models of the tonearms they should supply their very best cable (not suppossed to be replaced by the user at that time).

I’m curious about the sound quality of the Audio-Craft low resistance ARR-T din phono cable designed for MC cartridges.
nandric's avatar
nandric
4,086 posts
 

My impression by the most Japanese tonearms ( I was tonearm

collector earlier) was /is that they all used Din 5 -RCA cables

provided by the same supplier. All of them with copper wire which

coroded as function of time. There are of cource exceptions but

the most of those cables are worthless. It is not difficult to make

our own if one can handle soldering bolt. One can then chose

among many obtainable wires. But one need to be cereful with

their dimensions. The wire need to fit in those (damn) Din 5

connectors (grin).

More to discover