Thanks! for sharing that with everyone kosst.
Uncle Fester may be able to help with the power issue.
Dave
Uncle Fester may be able to help with the power issue.
Dave
Post removed |
I recently got my Quad II amps restored. They appear to be quite early, from the era when the amps were made and used in mono, though I haven't verified what year. Through a stupid move on my part, one of the fuses cracked-(the fuse holders are original- they conceal the end of the fuse but don't fully protect it). When I managed to extract it, and pulled the fuse from the other amp, they had the markings of the original fuses supplied with the amps- Belling Lee. I speculate that those fuses may have been in the amps since the '50s, when they were built. I replaced them with Littelfuse pieces of the original spec--I guess they aren't "original" in the purist sense, but it's a good quality fuse. A five pack was $1.68. I suppose, like anything else in this hobby, you can look for any slight improvement - current passes through these things, so it is part of the power supply, and just like other things, may yield an improvement, I don't know. (I do know that some audiophiles advocate "audiophile" fuses but never crossed that bridge simply because other things were more important). For example, with these amps, I sought out a matched quartet of original GEC KT-66 tubes, along with other period tubes. That, to me, was money well spent. The amps sound glorious on the Quad ESL. (Second system). |
I’ve turned my equipment on and off as much as anyone here and I’ve never had a fuse blow on me.This is what happens to a fuse over many switch on surges. Same fuse 5 different ageing periods, it hardens, carbonises, distorts it’s straight (new) shape because of flexing and will blow in the end. And it’s the only reason a fuse can sound better when changed. Is that when you change one that’s on the right that’s seen many switch on surges for just a brand new one of the same. https://i.stack.imgur.com/0uqWX.jpg Cheers George |