Rega RP8 and alternatives in $3000-4000 range

the vpi's are great with moving iron and moving magnet carts, no so great with moving coil unless you have 12 inch arm.  reason: no antiskate

fabsound- this is as good as it gets for the price. With the money saved,its worth investing in a $1K+LOMC to go along with it.
http://www.usaudiomart.com/details/649383010-new-in-box-vpi-classic-1-turntable-with-jmwclassic-1-to...

There is a Prime or 2 listed also, which is a step up.

I would offer $2k, or meet in the middle including shipping.

Consider an upper level phonostage if you haven’t already, to go with a higher performance table.

I disagree that the Prime or Classic is better than the RP8.  Actually i would say the rp8 is the better of the 2.  VPI tables do sound nice as I have one but they need to improve their arms.  They need a better antiskate system.  If they had the good anti-skate, all their tables would be phenomenal performers.  IMO, the rega arm is just in another league and a steal on the rp8.  I am seriously considering the RP 8 as my last table.  Its that good.  Either the rp 8 or a VPI aries with a 12 inch arm or a different arm other than VPI.  High mass designs are great but you really have to isolate them very well to hear all their virtues.  I have never heard a modern design at the price point of the RP8 that performs better. its spooky good.

tzh, I am wondering why you judge a turntable based on the tonearm that comes with it.  Is it imperative to purchase the VPI tonearm as a package deal with each of the two VPI turntables that you mention?  Until now, I did not think so, but I certainly could be wrong.  Also, I truly don't understand why the choice of cartridge type (MC vs MM) makes the lack of anti-skate more or less tolerable.  Both types of cartridge will create a skating force when used with any pivoted tonearm, VPI or other.

What about speed accuracy and stability, vis a vis the RP8?  I have been led to believe that Rega turntables run a bit "fast".  Does the RP8 include a motor controller, unlike the less expensive Rega turntables?

What I am saying, and by the way, I own a VPI, they need to improve their antiskate mechanism for their arms.  They do not allow for other arms to be used is true.  The rega has been said to run a bit fast.  I heard one the other day and brought records with me and I can say I did not notice it.  It did track much better than the VPI Prime which I heard as well.  I was very impressed with what I heard from the Rega.  First time I ever heard one.  The older VPI designs have an armboard.  The current production tables do not with the exception of the avenger.  The arm on the REGA seems to extract more form the grooves.  Its a darn good arm for the money.  I am not sure anything can touch it at that price point.  Moving Magnet cartridges comply better with VPI arms probably due to compliance, the low arm mass, and lack of antiskate. YMMV, but this has been my experience.  I also will say for the money, the scout is a great value and even though it will not track most moving coils as well as other arms, it still sounds pretty darn good.  I know it could be setup but it is just something I have noticed over time with many VPI tables.  They do have a very involving sound but a better antiskate would make a good table and arm a great table and arm.