2. speakers
  3. 128578-80822

Tekton Double Impacts

Anybody out there heard these??

I have dedicated audio room 14.5x20.5x9 ft.  Currently have Marantz Reference CD/Intergrated paired to Magnepan 1.7's with REL T-7 subs.  For the vast majority of music I love this system.  The only nit pick is that it is lacking/limited in covering say below 35 hz or so.  For the first time actually buzzed the panel with an organ sacd. Bummer.  Thought of upgrading subs to rythmicks but then I will need to high pass the 1.7's.  Really don't want to deal with that approach.

Enter the Double Impacts.  Many interesting things here.  Would certainly have a different set of strengths here.  Dynamics, claimed bottom octave coverage in one package, suspect a good match to current electronics.

I've read all the threads here so we do not need to rehash that.  Just wondering if others out there have FIRST HAND experience with these or other Tekton speakers

Thanks.
corelli
aricaudio's avatar
aricaudio
277 posts
 
Lula,

The chassis is 18.5" wide X 13.5" deep x 3.5" tall, with the power transformer sitting about 4.5" above that (with the tops of the 300B’s extending above those about an inch). Weight is just under 55 lbs unboxed- closer to 60 lbs packed. The amplifier uses two 5U4 rectifier tubes and independent transformers for each circuit in the unit. Best, Aric
charles1dad's avatar
charles1dad
10,250 posts
 
Aric,
Your description of the cathode capacitors explains the seeming high gain Tom has. Good to know that the gain level is adjustable.  This sure seems to be a very well engineered amplifier and exceptionally good sounding based on Tom's sheer joy😊.

Tom, Just let me know when you're ready for me to come over again. Im really looking forward to it. 
Charles 
almarg's avatar
Ag insider logo xs@2x
almarg
9,670 posts
 
Tom (Mac48025), my congratulations as well for this excellent improvement to an already very fine system. And kudos to Aric for making it possible.

Regarding the hum/buzz issue, I don’t know how you have the components physically arranged, but if your MZ2 is in close proximity to the amp or to any of your other components, including its own external power supply, you might try repositioning it to increase the distance between it and everything else in the system.

I particularly suggest that because in looking at photos of the MZ2’s innards it appears that its output signal grounds are directly connected to its chassis. Which I’m thinking might result in a small hum/buzz voltage being applied to the input ground of Aric’s amplifier corresponding to whatever small AC-related voltage may be magnetically induced onto the MZ2’s chassis by a nearby component.

As you are probably aware, use of a cheater plug as a long term solution results in a small but non-zero safety risk. (Note Aric’s statement above that the cheater plug was suggested "as a test").

In any event, congratulations once again!

Best regards,
-- Al

corelli OP
1,015 posts
 
Hi Steve,
Mac has owned Legacy speakers but  I have not. (We had the Magnepan 1.7's in  common.)  Sorry I can't help you.
cohicks4's avatar
cohicks4
45 posts
 
Thanks for the response Corelli, now I need Mac to see my question...
More to discover