Reducing Background Noise On Records


Hello.  I'm looking into ways of reducing background noise on LP recordings. Some of my records just have a lot of noise (most likely from how they were recorded). My system consists of a Yamaha DSP-1A integrated amp, Pro-Ject Debut Carbon turntable (acrylic platter equipped) with an Ortofon 2M Blue Cartridge. My speakers consist of a pair of Wharfedale Rubiance RB-27's in the front and RB-23's in the rear with a Mirage FRX-S15 powered subwoofer.

I recently integrated a DVD 3BX-DS into my system to improve the impact and dynamic range of my records. Should this be sufficient or are there other devices (such as the KLH Burwen Research DNF 1201A Dynamic Noise Filter) that can better reduce the background noise of my records in question?  By the way, I do clean my records with a VPI HW16 record cleaning machine and rinse off the cleaning fluid twice with distilled water. I also use a Zerostat 3 to remove static before playing a record.

What do you think? 


128x128cspiegs
@cspiegs,

I have the Pro-Ject Debut Carbon Esprit SB with a Ortofon 2M Blue cartridge. I believe it is the same as your setup, with the exception of a built-in speedboat speed control. I don't hear any unusual surface noise from the TT. I do hear a bit of what I consider to be motor noise, but it is minimal and does not affect my enjoyment of listening to LPs on this TT.

If the noise in emanating from the TT, I think you may have a setup problem. Since your Yamaha DSP-1A is an early digital HT Processor/Amp, is it possible that the noise you are hearing is not coming from the TT, but is emanating from another location in the processor/amp? How does it sound with other sources, especially analog sources?
I'll tell you what...You can spend a lot of money on more electronics that add un wanted color to your sound, or you can buy a cheap can of Gruv Glide this spray will kill all static and lowers back round noise greatly. This stuff also protects your stylus from wear. It works!

 http://gruvglide.com/

Matt M
I have also used Gruveglide, and it seems to work as advertised. The biggest improvement though, came with building my own Ultrasonic Record Cleaning machine. Fairly easy to build, and inexpensive, at $200 including the Ultrasonic cleaner.

If you are interested, look up the design by BBtx at DIY Audio. A complete list of parts and photos are available for free. You really can't go wrong. Best of luck,
Dan
I suggest a $20 test.

Send a record or two out for ultrasonic cleaning. I had a VPI 16.5, and now clean ultrasonically. Big differences, noise among them.
 islandmandan and terry9 have it right.

 If you have a TT you`ll eventually/inevitably end up with an US cleaner....period 

Has anybody else noticed how many VPI RCMs seem to be popping up  on the 'bay ??

Yeah...there`s a reason for that, so either buy one outright or have fun and save a few dollars and put one together yourself.

You`ll be listening to records that you thought were hopelessly noisy/unlistenable and you`ll be hearing so much more in records you thought you knew so well.