Thanks! for sharing- beetlemania.
Dave Garretson is very informative regarding Clarity Caps and other OEM parts.
Happy Listening!
Dave Garretson is very informative regarding Clarity Caps and other OEM parts.
Happy Listening!
@beetlemania When selling to OEMs like Thiel, custom capacitor values are often supplied directly by ClarityCap. I recently gave Rob a OEM price schedule for ClarityCap legacy model SA/630V(as used in the original 2.4SE) and our new, improved models(CSA/630V, CSA/250V, CMR/400V). Given sufficient demand, perhaps Rob could offer those as upgrades, or alternatively I could coordinate a group buy. Dave |
I engaged in an email exchange with Rob last week re upgrading the caps on my 3.7s. He told me "To upgrade the CS3.7, a 76uf, 151uf, and a 16uf cap would need to be installed in each cabinet." I was unable to find these values. He then suggested "The values I listed are the values for upgrading the CS3.7. It is possible that the capacitors may have to be purchased with the values described (NB: in the catalogs). For example: The 76uf CSA cap may have to be summed from a 75uf CSA and a 1uf CSA cap. The 151uf cap may have to be summed from two 75uf and a 1uf. The 16uf CSA cap may also have to be summed from a 15uf CSA and a 1uf CSA." There you have it. I'd like to do this, but do not have the technical acumen. If Thiel Service offered this, I'd jump. Also, there a lots of varieties of caps out there, and it's a little scary for me that I might alter the speakers in a way I did not like! |
@tomthiel Thanks for the clarification. This pic http://www.hifishock.org/gallery/speakers/thiel/cs2-4se-2-thiel/ shows "Jim Thiel Signature" versions SA 28uF 630V and SA 14uF 630V. I cannot see a 1uF cap in parallel. The values on the woofer section are not evident. I did not see these values online at Madiscound or Partsconnexion. Maybe I didn't look closely enough? Also, is the crossover accessed thru the passive radiator or bottom panel? |