Thiel Owners

As always, Thank You, or the clarification Mr. Tom Thiel-
Happy Listening!

I engaged in an email exchange with Rob last week re upgrading the caps on my 3.7s.  He told me "To upgrade the CS3.7, a 76uf, 151uf, and a 16uf cap would need to be installed in each cabinet." I was unable to find these values. He then suggested "The values I listed are the values for upgrading the CS3.7. It is possible that the capacitors may have to be purchased with the values described (NB: in the catalogs). For example: The 76uf CSA cap may have to be summed from a 75uf CSA and a 1uf CSA cap. The 151uf cap may have to be summed from two 75uf and a 1uf. The 16uf CSA cap may also have to be summed from a 15uf CSA and a 1uf CSA."

There you have it. I'd like to do this, but do not have the technical acumen. If Thiel Service offered this, I'd jump. Also, there a lots of varieties of caps out there, and it's a little scary for me that I might alter the speakers in a way I did not like!

@tomthiel Thanks for the clarification. This pic
http://www.hifishock.org/gallery/speakers/thiel/cs2-4se-2-thiel/
shows "Jim Thiel Signature" versions SA 28uF 630V and SA 14uF 630V. I cannot see a 1uF cap in parallel. The values on the woofer section are not evident.

I did not see these values online at Madiscound or Partsconnexion. Maybe I didn't look closely enough?

Also, is the crossover accessed thru the passive radiator or bottom panel?

@dgarretson Thanks for the reply. So, are the CS2.4 values available to the public? I will contact Rob Gillum for more info.