Effect Ohms Have on db and Speaker Sensitivity

Thank you for all the feedback.

Thanks to Almarg for the math lesson.

Maybe I should have started by stating my issue:

I have speakers with 97db efficiency into nominal 6 Ohms. I'm running a pair of 300B mono amps......about 8 watts. 

I thought that 97db speakers at 6 Ohms would be efficient enough for the 300B's to really "sing,"  however, they lack the bass depth and slam that we all enjoy.

I may need a bit more power, or a speaker that is 97db into 8+ Ohms.

8 Ohm taps only.....unfortunately.

There are a many possible causes of the symptoms you have described that are more likely to be responsible for the issue than the fact that the speakers have a 6 ohm nominal impedance instead of an 8 ohm nominal impedance. One such factor being how the impedance of the particular speaker varies from its nominal value over the frequency range. Another possible factor being the output impedance of the particular amp and how it interacts with the variation of speaker impedance over the frequency range.  Another possible factor being an impedance incompatibility between the preamp and the amp.

More power may not be the answer either.

What I suggest is that you indicate the specific make and model of the speakers, the amp, and the preamp or other component that is driving the amp. Some idea of the kind of music you listen to, how loud you listen, room size, and listening distance may also be helpful. Hopefully that information will enable us to provide suggestions that focus on your specific situation.

Regards,
-- Al

Hello Almarg,

I wanted to get back to you after I tried a couple things.

While it did not solve 100% of the issue, I did get 60% of the desired result by lowering the noise floor with an Entreq Silver Minimus Ground Box + an Eartha cable.

I am able to now turn up the volume about 1 to 1.5 clicks, drive the speakers a bit better, without sacrificing clarity.

Not cheap, but a nice tweak.

Labpro