SoundSmith Rega combo

I had a P3 with a 3mm spacer playing a Dynavector 10X5, this improved dynamics and allowed a little more forward rake, that allowed the cartridge to sit just right...it is incredible when you find synergy with a tonearm and cartridge! Dynavectors work very well on Rega arms and sound very lively. If you end up using a high spacer over 3mm’s you’ll need to get a low slung counterweight, so you can close the dust cover! :-)

P.S. Im sure the SS’s are awesome as well

Matt M

Thanks Matt, hoping to not having use a spacer and don’t want to change the counter weight 

Take a look at these links
https://www.vinylengine.com/tonearm_database.php
https://www.vinylengine.com/cartridge_resonance_evaluator.php

The effective mass for the tonearm on the P3 in the database states 11.5 gm

The cartridge Compliance appears to have two values 22 and 28 uN - I’m not sure what the really means - are there two versions available for order?

The P3 arm has an effective mass of 11.5
The Cartridge has a weight of 6.8 grams + mounting hardware - provided the total does not exceed 8 gm

Using the evaluator, from the resulting chart it would appear the the 22uN would be suitable for the arm - it’s just in the green

It would appear the 28uN version would not be suitable

The Irox Blue might be a better match

My Audiomods arm that uses a rega arm tube  has a list of compatible cartridges - see
http://www.audiomods.co.uk/cartridgechoice.pdf 

I just hope I've read everything correctly - Steve