Not entirely sure of your point of misunderstanding per se, but what I believe you are (rightly) making a case for is the idea of a hardwire bypass. IOW, get rid of the (invariably inferior) connector on both the wire And the connected component - to make for a direct wire-to-wire connection. That's how I roll, actually. But, I'm not entirely sure from that why you might say that the speaker wire was itself unimportant...?? Maybe you mean to say that the 'quality' of the wire may not be as important as simply getting rid of the weak point of the connectors? In that case, I think I might agree with you!
Thinking out of the box here. It might make some defensive
I was thinking, that all the different wire constructions and purities is pointless if they are tied to a connecter. How can the signal carry the purist signal when it has to be compromised by the mercy of a connecter. Why not make a solid wire out of the connecter and use the bare wire for the connecter? Same end result. I’m not an engineer but it seems to me it would sound the same. Right? The end product is only as good as its weakest link. I’m beginning to think speaker cables are too over rated . I switched out my $1500 cables for some 10 gauge $20 copper wire with bare ends and I will say if there was any difference it was slight. I do know my amp doesn’t clip like it used too. And music is louder and more dynamic. I tried some 12 gauge and couldn’t tell any difference from the 10. And yes all the cable lengths were 8 foot. If you want the purist signal then you would have to take the wire and run it right through the speaker and bypass the terminals. So my question to the electrical educated members here is how can the signal arrive intact if it has to be transmitted through a connecter and then to the speaker terminals. It makes me think speaker wire is not all that important. I’m just saying. I don’t mean to be starting a war here.
- ...
- 71 posts total
- 71 posts total