2. cables
  3. 134438-1252

Thinking out of the box here. It might make some defensive

I was thinking, that all the different wire constructions and purities is pointless if they are tied to a connecter. How can the signal carry the purist signal when it has to be compromised by the mercy of a connecter. Why not make a solid wire out of the connecter and use the bare wire for the connecter? Same end result. I’m not an engineer but it seems to me it would sound the same. Right? The end product is only as good as its weakest link. I’m beginning to think speaker cables are too over rated . I switched out my $1500 cables for some 10 gauge $20 copper wire with bare ends and I will say if there was any difference it was slight. I do know my amp doesn’t clip like it used too. And music is louder and more dynamic. I tried some 12 gauge and couldn’t tell any difference from the 10. And yes all the cable lengths were 8 foot. If you want the purist signal then you would have to take the wire and run it right through the speaker and bypass the terminals. So my question to the electrical educated members here is how can the signal arrive intact if it has to be transmitted through a connecter and then to the speaker terminals. It makes me think speaker wire is not all that important. I’m just saying. I don’t mean to be starting a war here.
blueranger
cleeds
6,294 posts
 
blueranger
Even a top notch connector could not totally pass all the details of an exotic cable
Will you please tell us on what you base this claim?
cleeds
6,294 posts
 
blueranger
With the $1500 speaker cables, I could never get a good connection to the speakers because the spades were so thick and hard to attach
That's an example of using the wrong connector for the application. It's not really a fault of the connector itself. 
shadorne's avatar
shadorne
7,491 posts
 
The idea of a connector or various cables interfering with musical detail is pure nonsense. At audio frequencies the cable appears as a simple resistance and capacitance. Connectors are not relevant provided they make good contact. Fancy cables are just a fashion statement - they don’t do anything for the sound if the equipment is well matched and if things sound different then that is simply expectation bias fooling you. Overly thin cables and overly long cables will have high resistances and this can become sufficiently audible in extreme cases due to the modulation of the speaker response in combination with the speaker impedance curve.
geoffkait's avatar
geoffkait
23,365 posts
 
The issues with cables and connectors are most certainly complicated by the directionality of wire and by any number of contact enhancers or conditioners such as the new Graphene product and say, Deoxit. Obviously a good clean mechanical connection should be achieved in any case.
mtmywallet
1 posts
 
Here is an example of what you’re after (I think)
http://www.silversmithaudio.com/silversmith.htm?philosophy.htm~rightFrame.

More to discover