2. speakers
  3. 128578-80822

Tekton Double Impacts

Anybody out there heard these??

I have dedicated audio room 14.5x20.5x9 ft.  Currently have Marantz Reference CD/Intergrated paired to Magnepan 1.7's with REL T-7 subs.  For the vast majority of music I love this system.  The only nit pick is that it is lacking/limited in covering say below 35 hz or so.  For the first time actually buzzed the panel with an organ sacd. Bummer.  Thought of upgrading subs to rythmicks but then I will need to high pass the 1.7's.  Really don't want to deal with that approach.

Enter the Double Impacts.  Many interesting things here.  Would certainly have a different set of strengths here.  Dynamics, claimed bottom octave coverage in one package, suspect a good match to current electronics.

I've read all the threads here so we do not need to rehash that.  Just wondering if others out there have FIRST HAND experience with these or other Tekton speakers

Thanks.
corelli
david_ten
5,480 posts
 
@jdechamp

Good questions across the board.

I would reach out to @laaudionut and @rubytuesday Both have very recently made the choice / move to the SEs. Brian (laaudionut) did the move from the DIs to the SEs. I’m sure they both had to work through similar questions / issues.

Same with regards to taking the modded approach. If you haven’t already done so, reach out to Bill @grannyring

Tom @mac48025 has the longest exposure to the DIs and has had significant time with the SEs now...and will be a terrific person to bounce your questions off of.

@teajay was personally helpful with my early decision making process with the SEs vs the DIs and Terry has been very open about being reached out to.
david_ten
5,480 posts
 
As for my take on this, Charles says it best in his post:

Without exception each account where someone has heard or owned both models they unequivocally say that as good as the Double Impact is the SE is the superior speaker. If you can comfortably afford the SE I’d suggest going that route. Decide what type of amplifier sound you most desire (as you’ll heard it with this speaker). My philosophy is get the best that you can responsibly afford and don’t look back.

As for your question on solid state and more output power:

I drove the DIs with the Spread Spectrum Technologies Son of Ampzilla II It's a Class A/B amp with 220W into 8Ohms; before moving to the Pass Labs XA-30.8

I have a T+A PA 3100 HV being delivered next week for an in-home demo. I'll report back as it will be my first go around with much higher power into the SEs.

Even though I am using Solid State amplification, and very happily so with the SEs, my primary recommendation would be Tubed Amplification for the SEs. With the DIs, either or.
jdechamp
33 posts
 
 Thank all of you guys very much, the information is very helpful. I live in Annapolis Maryland and I’m wondering if there was anyone in the Washington DC or Baltimore area that has either the DI‘s or the DI SEs. Now that I’m leaning heavily toward the SEs I would really love some sort of listening experience prior to pulling the trigger.

Thanks again for the dirrect responses and of course all of the information contained in this thread!

Joe
klh007
621 posts
 
Joe, lancelock on this thread lives in Annapolis, owns DIs, and has ordered DI SEs. He has used all of the LTA tube amps, 10, 40, and new Ultralinear; Plinius, and Mirror Image SS amps @200WPC, so he can shed some light on the differences on amplification. Tekton did show with JC1s at 2017 RMAF to great effect, I'm sure they would be a worthy choice.
david_ten
5,480 posts
 
@corelli 4.5K and counting Not bad for a ciclista! : )
More to discover