2. misc-audio
  3. 131672-481

The new Synergistic Research BLUE fuses ....

New SR BLUE fuse thread ...

I’ve replaced all 5 of the SR BLACK fuses in my system with the new SR BLUE fuses. Cold, out of the box, the BLUE fuses stomped the fully broken-in SR BLACKS in a big way. As good as the SR BLACK fuses were/are, especially in comparison with the SR RED fuses, SR has found another break-through in fuses.

1. Musicality ... The system is totally seamless at this point. Its as if there is no system in the room, only a wall to wall, front to back and floor to ceiling music presentation with true to life tonality from the various instruments.

2. Extension ... I’ve seemed to gain about an octave in low bass response. This has the effect of putting more meat on the bones of the instruments. Highs are very extended, breathing new life into my magic percussion recordings. Vibes, chimes, bells, and triangles positioned in the rear of the orchestra all have improved. I’ve experienced no roll-off of the highs what so ever with the new BLUE fuses. Just a more relaxed natural presentation.

3. Dynamics ... This is a huge improvement over the BLACK fuses. Piano and vibes fans ... this is fantastic.

I have a Japanese audiophile CD of Flamenco music ... the foot stomps on the stage, the hand clapping and the castanets are present like never before. Want to hear natural sounding castanets? Get the BLUE fuses.

4. Mid range ... Ha! Put on your favorite Ben Webster album ... and a pair of adult diapers. Play Chris Connor singing "All About Ronnie," its to die for.

Quick .... someone here HAS to buy this double album. Its a bargain at this price. Audiophile sound, excellent performance by the one and only Chris Connor. Yes, its mono ... but so what? Its so good you won’t miss the stereo effects. If you’re the lucky person who scores this album, please post your results here.

http://www.ebay.com/itm/ULTRASONIC-CLEAN-The-Finest-Of-CHRIS-CONNOR-Bethlehem-Jazz-1975-NM-UNPLAYED-...

Overall impressions:

Where the RED fuses took about 20 hours to sound their best, and the BLACK fuses took upwards of 200 hours of total break-in, the BLUE fuses sounded really good right out of the box ... and that’s without doing anything about proper directional positioning. Not that the BLUE fuses don’t need breaking in, they do. The improvement continues through week three. Its a gradual break-in thing where each listening session is better than the last.

Everything I described above continues to break new ground in my system as the fuses continue breaking in. Quite honestly, I find it difficult to tear myself away from the system in order to get things done. Its truly been transformed into a magical music machine. With the expenditure of $150.00 and a 30 day return policy there’s really nothing to lose. In my system, its like upgrading to a better pre amp, amp, CD player or phono stage. Highly recommended.

Kudos to Ted Denney and the entire staff at SR. Amazing stuff, guys. :-)

Frank

PS: If you try the SR BLUE fuses, please post your results here. Seems the naysayers, the Debbie Downers and Negative Nellie’s have hijacked the original RED fuse thread. A pox on their houses and their Pioneer receivers.

Frank



128x128oregonpapa
uberwaltz's avatar
uberwaltz
13,381 posts
 
People
Do you seriously think that our little audio hobby is the ONLY area in the world where science cannot explain away everything or be followed faithfully?
You really need to get out a bit........
wolf_garcia
6,695 posts
 
Fake question? I expect a more reasoned response even from pseudo experts like Kaitty…head injury indeed. What I don't expect at this point after repeatedly asking about it is one of the manufacturers of "special" fuses mentioning anywhere what they were after even at the early stages of design…before implementing whatever they were planning to do with a half inch of tiny wire, they must have been thinking about how and why this might help the resolution of a system…although marketing (A fuse for 150 bucks! 30 day return policy…YEAH THAT'S IT) is likely to have come first…so my "fake" question remains unanswered regardless of Kaitty's silly unhinged and unsophisticated responses.
nonoise's avatar
nonoise
10,826 posts
 
In these discussions it's been shown that there are engineers who've tried fuses and though they can't explain why they make an improvement, they accept it. They know more than the naysayers here, make better products than just tinkering with junk at home, read the same manuals, are better educated, and still have the ability to keep an open mind. I think that's what differentiates them from the naysaying, self described experts here. 

All the best,
Nonoise


lalitk's avatar
lalitk
5,434 posts
 
+1, nonoise 👍
geoffkait's avatar
geoffkait
23,365 posts
 
Give me a break. Every real engineer knows extactly why these fancy fuses work. It’s the pretend engineers who don’t me the English majors. It’s not rocket science, people. Hel-loo! 🚀
More to discover