Is it Safe/ok to Plug Amplifier into Processor

I would say stay away from it.

Several years ago I put a carver amp plugged into a yamaha digital surround receiver.

I blew something out in the carver amp and had to get it fixed. Amps usually need more current then the receiver can give.

Heres what you do David. Get a Monster 3500 or better (may be 3500 or 3600 and better) conditioner and plug the amp into that. The 3500 and better monsters have an ac in which allows you to plug a cord from the monster into your reciever ac outlet. So, when your receiver turns on, the monster then turns on, thus turning on your amp cause your amps in the Monster, and I'm not talking its belly!

I did that after I blew the carver amp out. I was always one that does not like to leave my amp on so I understand wanting to turn it off with the system. I am fortunate that my EAD multi has a trigger that my processor turns on.

I actually recently purchased a Belkin Pure av pf60,(great deals online btw) and I think it has some switching, but I am not yet sure how it exactly works. I think it may allow me to set the outlet to turn off when the processor is turned off.

If anyone is familar with this Belkin unit I would appreciate the help.

David

Doesn't the GFA 7400 have a 12 volt trigger input and the Outlaw 950 two 12volt trigger outputs?

There is probably a maximum power rating on the back of your Outlaw's AC receptacles. I would strongly recommend against plugging the amp in there for a couple reasons. First, it is probably only designed to run accessories like a DVD player (low wattage). Second, pulling that much current through the Outlaw's power cord would likely add distortion.

I wouldn't be happy .