Good, Affordable Horns?

I've examined some of the options suggested and, if I were to do this, I think I would go the classic/vintage route perhaps with used Klipschorns in the corner in the 12X12 foot room where the Dynaudios are today.

I am still concerned though about what to expect low-end-wise in this small, square room.

Is anybody brave enough to provide a confident vision of what I might expect sonically out of a pair of corner Klipschhorns in a typical 12X12 room, with a dens carpet covered concrete floor, drywall and average ceiling height?

Also, Klipschorns have been around for a while with some slight variation over the years in the standard configuration. Are all Klipschhorns, save those with custom upgrades, created equal? Any variations in particular to levitate towards or steer away from?

From what I have learned through they years may people like the older Klipschorns, the ones from the 50's 60's, with some crossover upgrades. But I'm sure you will get all kinds of answers on that one.

Are all Klipschhorns, save those with custom upgrades, created equal? Any variations in particular to levitate towards or steer away from?

There's plenty to read on the Klipsch forums as far as opinions on this go. The drivers and the crossover have changed over time. I would look for the K55M mid drivers with metal horn bodies (as opposed to later models using plastic for the body - I would also damp the metal horns with damping material such as Dynamat or the equivalent sold cheaper at Parts Express, or with plumbers caulk), and the K77 round-magnet tweeters (as opposed to square magnet). I would actually recommend replacing the tweeters as a high priority (unfortunately this requires some effort as the better drop-in replacements, like the Beyma, are a bigger form-factor. I have heard the Crites drop-in replacement and was not at all impressed - go for the Beyma or Fane). Big, immediate gains can be had there. The crossover would my next target, especially if an older speaker. With the LaScalas the desired stock Xover is the AA model. I'm not sure what the Khorn's might be. I believe the speakers that conform to those components I've mentioned were late 60's to early 80's. Obviously if you can find a pair locally you will save some large coin and headache on the shipping.

Marco

Marco, thanks so much for the info!

I owned a pair of Klipsch Forte II for over 15 years. When I knocked on the cabinet, it appropriately sounded like someone knocking on wood, there was no ringing sound. Kilpsch is a fine speaker.