Kinki Studio EX-M1 200wpc Integrated Amplifier

I contacted the designer, via email, about using his amp with my modified Klipsch Lascalas, ( 104 db ) and he indicated the gain switch was for situations such as this. I obviously do not need this much power, although I have had monster sized amps driving them in the past. I always prefer smaller amps ( with less signal path / less output transisters ), but the circuitry with the EX-M1 is quite minimal, considering the output of this thing. Enjoy ! MrD.

Thanks for the clarification, Al. I was under the impression that some watts were wasted if one had to crank up the volume before hearing something. 

And, mrdecibel, the designer of my now, sadly gone, Tonian Labs TL-D1 speaker was of the same mind as you. He felt that the best amps had just one pair of output transistors (one per channel) as they had the speed necessary for sounding real. As one doubled up or went further, it slowed and muddled things too much for his tastes.

All the best,
Nonoise

I was under the impression that some watts were wasted if one had to crank up the volume before hearing something.

That would be true if the combination of amp gain, preamp gain (if there is a separate preamp, although of course there wouldn’t usually be one in the case of an integrated amp such as this one), and source output voltage is insufficient to drive the amp to its maximum power capability even with the volume control at max.

That can happen in some situations, and in fact I’ve been discussing just such a situation in a recent thread which involved the possibility of using a Herron phono stage to drive a certain power amp via a passive preamp which provides no gain.  But that would be a fairly unusual set of circumstances.

Best regards,
-- Al

I wonder how does this amp competes against the Hegel Separates (P20 & H20), i have been considering reducing items and go for a super Integrated instead

Has anyone made any more comparos with other brands like Hegel, Devialet, Bryston, Pass, T+A (the ones around $10,000)

Best regards

I believe @teajay compared the EX-M1 to a $30K T+A and found the 
T+A to better it in air, separation and imaging but found it to be it's equal in the base. Not bad company to be in. He should have a review coming soon. 

All the best,
Nonoise