Ohm Walsh Micro Talls: who's actually heard 'em?

I drive my 100s with ss TAD mono amps, but I also own a pair of Prima Luna tube mono amps. I'll roll some KT88s into the PL and report back in a few days. All in the interest of science!

Marty

BTW, since I'm using subs, the Ohms should be a somewhat easier load and the chances of success may be better.

Marcus,

Thanks very much for your post. I think you've done a good job of articulating the issues here.
I got to listen to the Ohm's a little more yesterday and I must say that the tonal character and image focus change quite dramatically when you adjust the distance between the MWT's. By pulling them farther apart and thus aiming the supertweeters to converge closer to your listening position, the high's are emphasized and the image focus becomes sharper. Now, I think I may currently have them a little too far apart, because yesterday it sounded as if too much of the sound was "stuck to" the speakers, which is definitely NOT the way Ohm's should sound... so I'll try moving them a little closer. But as I said, imaging definitely tightened up and the sound brightened when I moved them farther apart.

I, too, had mixed feelings about accepting John's offer, but I was so taken with his determination to please and make a sale that I agreed to give the modified drivers a try.

For what it's worth, my amp is a ss/tube hybrid, and I'm wondering how that affects my current results...

Martykl,

Cool!

Thanks for stepping up to the plate.

I anxiously await your report!

Rebbe, though I've never heard the Unico, based on my experience so far with the tube DAC, pre-amp and SS amp, I think the hybrid integrated is a very good place to be with the Ohms.

Think I may have nailed it....

I tried moving the MWT's even farther apart, further than I'd ever have thought of placing them... several more inches from each other. The imaging has really come into focus and the tonal balance is considerably brighter, but the expansive soundstage is still there, only seemingly bigger. Brothers In Arms sounded amazing!

More to come...

I think my comments regarding soundstage collapsing applies only in the case of the adjustable Ohm 5's where I up the treble level using the switch on that model but speaker location stays the same. In this case I find the soundstage collapses somewhat compared to prior. In other words, if speakers stay equidistant, but tweet level increases (relative to the Walsh provided portion of sound spectrum) the soundstage may collapse somewhat accordingly.

With any model, moving the speaks further apart to get more direct exposure to the tweet should maintain a wide soundstage.

If the imaging sounds like it is in focus similar to the Arros correctly set up then I would say you have nailed it!

Congrats!