2. home-theater
  3. 1234930501

Integra 9.8 troubles

I purchased a new integra 9.8 a few weeks ago & I finally got around to hooking it up. I figured it's probably something that I am doing & I cannot figure out what that it.

I use a PS3 for blueray which is connected via HDMI
Integra 9.8 is hooked to TV via HDMI

Anyways, the pre/pro does not automatically select DTS, THX etc when I put different blueray discs in. On the display it only shows the front left & front right speaker is working however I can hear sound from all speakers (5.1). I changed my PS3's setting in the AV setup area to bitsream which is what the local shop told me to do.

Any ideas what this could be? I haven't called Integra's help line but I have bigged the local shop that I purchased the unit from.

I was under the impression that front left/right, center, sub & surround left/right should be listed on the display of the pre/pro. I can only get the main front left/right to show that it is on.

thanks
128x128viggen900
viggen900's avatar
viggen900 OP
64 posts
 
thanks for the info.... I will look for the AVS forum & see what I can find there.

FWIW - I threw in a HD-DVD & I get the same results I get from using the PS3. Integra's display states HDMI through... & it doesn't automatically select a surround setting, started the movie in normal 2 channel stereo
chadnliz
3,736 posts
 
check menu on Integra as noted earlier.
kr4's avatar
kr4
3,685 posts
 
One more time: The prepro cannnot select a surround setting. You must select the proper track with the player and you must define the processing for each format on each input in the 9.8 menu.

Kal
More to discover