On the fence about Vinyl need a good phono stage for A/B testing

Ortofon 2M Bronze says "Recommended load capacitance - 150-300 pF" which means I have to select 150/300pF on Luxman?. I only see one set of inputs for MM on the back of Herron.

You need to adjust the capacitance so the the total falls in the 150 - 300 pF range taking into account the capacitance of your cables as well. So if your cables have a capacitance of 100 pF you would select 150 pF on the Luxman for a total of 250 pF which is in the range of 150-300 pF. 

If you are new to this and you are buying something as expensive as the Luxman you should buy from a dealer and have the dealer help you. If you are in the Phoenix, AZ area I can recommend someone.

You can also run your Luxman or other phono preamp directly into your Line Magnetic integrated instead of through your DAC/preamp which is what I would recommend.

jperry, thanks yes I live in the SF bay area. I have dealer but I am just thinking ebay for used EQ-500.

I will be running EQ-500 / CL-38Uc / Herron to Legacy Wavelet and from Wavelet to pre-in of Line Magnetic. 

Right now my signal chain is Rega P6 with 2M bronze -> phono stage of Marantz SR7005 ->  Line Magnetic.

Geek101:

Please don’t read this the wrong way. Perhaps you mentioned earlier in the thread that you are planning to eventually move to a higher end cartridge, not that there is anything at all wrong with the 2M Bronze. If you do plan to move up then ignore this post, if not, I would humbly suggest that the EQ 500 may be overkill. 

audiofun, Would an upgrade to Audio-Technica AT-ART9 be good enough?. Would Luxman CL-38uC be good, an used BAT VK-P10SE or Herron VTPH-2A?. Luxman CL-38uC seems to be more than just a phono stage seem quite a value?. EQ-500 is just a stretch.