Vandersteen 5

Last night I set the High-pass filter to 10k (per McCormack) and well WOW...The Vandersteen's just came to life. The Subs are now firing and I swear the high's and the mid's sound better. While I loved how by 2CE sig's sound the 5's sound much better. 

1.) Now for another question: Do I still need my subs to play LFE signals when I watch movies or will my current setup route the LFE signals to the subs built into the 5's?

My current setup is as follows: 
I've got a Rotel RSX 1550 A/V (yes I'm going to upgrade once budget allows), where I have my surrounds (for now 2Ce's as rears) and center (VCC-1) connected. For the 5's, as the fronts, the Rotel acts as the preamp, sending the front signal to the 5's. I have the 5's set as large and everything else set as small and subs as none. Is this correct and will the LFE be routed to the 5's? the Vandersteen manual says I don't need any other subs. Just wondering if I'll get full effects for movies this way? 

@tomic601 Thank's I'll give Randy a call today and see if he's be willing to swap/sell the filters. I'll also check out the Leica disto. My next project will be getting everything dialed in a positioned correctly, as I'm sure everything is a mess now. 

As for power cables the guy who sold the the 5's and the amp also gave me two anticable power cables, as well as a  VHA Flavor 2. How do I tell which version of the antipower cable I have and is this good enough for the amp? Should I sell the others? The VHA seems to be for preamps, but doesn't fit my rotel. 

Last thing. The guys at SMC audio have been amazing. They've been super help and spent a ton of time with me I'm super appreciative. I also plan on asking them to upgrade my amp once I get everything else dialed in.  

The guy who sold you the equipment gave you some nice stuff.
I say try both cables and see which one you like. And, give things time to settle in before making upgrades.-You won't be able to tell what makes a difference until you know what your system sounds like.
Re: the Rotel,
I have no idea what a home theater amp does or doesn't do, as I am a 2 channel guy. I can only say give it a try and see what you think.
B

@mzwerner - I have some Vandy(2C), Rotel(1055), Multi-Channel experience.

Your 5's will give you all the low-frequency (sub) response needed (Subs as none is correct) Just set them (as you have them) as "large". The "large" setting sends all frequency to the speaker(s), "small" trims off lower frequencies with a cross-over (if I remember correctly, 100K and below). As for your 2ce's set as "small", that is a matter of choice on whether you want full/low-frequency signal sent to those speakers, they obviously would handle them fine, they are full-range speakers, it's more of a matter of if you as the listener want the bass coming from the surrounds or not.

And if I recall the LFE setting, that is a (Rotel) setting to either filter out those super low frequencies that can drive same building neighbor crazy.

My Rotel expired and I replaced it with a Marantz 7702MKII (multi-channel Pre-Amp only. I have an old Adcom 535-2 (2 535's in one box) driving Vandy 1B Surrounds, and I can't remember the not great brand of high rear surrounds I have.

@kmckenn 
I think  I've got the 5's dialed down, but I'm not sure it it's planing the LFE signals. I think I need to keep playing with the settings.

I'll set the 2Ce's as large and see how they sound. I'm only planning on using surround for movies anyway. 

I guess at worse case I could keep one of my subs and set the crossovers to 40hz?

I think I've got everything up and running to a decent degree now. I've got the LFE set up for home theater and it sounds great. V5 and rear 2Cesigs set to larger no subs (currenlty trying to sell them). 

When I play music on two channel the V5 - 225 combo sounds amazing. 

I still need to send the crossovers in for the battery change, they're about 1 year overdue. She sounds amazing now. I'm curious to see what the fresh batteries do. 

Does anyone know how to properly adjust the 11 band equalizer on the back?
    1.) Do I buy a sound meter? 
    2.) Is it better if I just set the screws to neutral and call it a day?
    3.) Leave at whatever setting its at now?
    

Would the V5 subs benefit from fancy audio power cables or are standard cables fine? I bought them with fancy cables which don't fit the V5 plugs (Anticable 3), which didn't fir the plugs so I've been using standard cables, and may try and sell the fancy ones.