Feed me, Seymour!
A black hole went into my Marantz SA-10!
I always use a Herbies black hole II CD disc damper. It somehow got lost inside the transport. The tray is shallow as is, so it didn't take much for it to get knocked, and in it went! So I freaked out. I looked inside behind the tray with a bright LED flashlight. I didn't see it. Everything works. Tray goes in and out without any snagging. No skipping. I'm not not very mechanical and have no idea which screws to loosen and don't want to mess with it. It happened about 30 hours of listening ago. I use the Herbies black hole CD disc damper for 6 years. When I had my Sony 5400 ES it did make a difference and was repeatable. My GF agreed. I never did the AB comparison on the Marantz. Maybe the transport on it is not tweakable since they built it themselves. I know Steve Nugent here is a big believer in some kind of damping. Anyway its playing.
- ...
- 34 posts total
If you SA-10 is anything like my SA-15S2b, then look at the rear of the unit. Running along the top should be some screws that secure the top lip to the unit’s back frame. After undoing those screws, there should be (if Marantz form follows function ) two relief areas that raise out from the lip of the top trim. Using some thick cardboard or something similar placed flat against the back of the unit with it abutting the top trim, place a flat head screwdriver up into the relief and gently turn it. Then do it to the other one. It may take a couple of tries but notice the top lid will not move much as it take just a little movement to free the top from where it securely mounts to the top front of the unit. (The cardboard is used to prevent any damage or nicks to the back of the unit). Now just pull backwards and slightly upwards on the top after it frees itself from the front of the unit and it should come right off. There may be some top frame guides that run along both top sides that help secure the top lid. They just act as guides and help to keep the lid on tight. You should have no trouble locating your Herbie’s disc damper. All the best, Nonoise |
Great advice from “Nonoise”, while you are in there you may want to add some auto sound deadening film to the top and sides. Tap around with your fingers and you will hear where the vibrations are the strongest. I did this several years ago with my Sony ES and it was a noticeable improvement. https://www.soundproofcow.com/product/vibra-block-sound-deadening-material-pad/?gdffi=d462e8110af047... https://www.crutchfield.com/p_15411101/Dynamat-Dynaliner-1-8-thick.html Compressed air is good for removing any dust bunnies you may find inside as well. Good luck!👍 |
- 34 posts total