thanks. Based on the picture, the degree of off center should be more than 5 degree, (which is ~ 0.2mm arc for a 10mm radius) and should not be visible. The cable connection looks fine, I will double check the connection on cartridge. I remember someone use multimeter to directly measure the voltage output of Left and right channel of cartridge. Maybe this is one way to check? Thanks.
Rega Ania Cantilever Bent?
I bought a rega P6/Ania combo and I just cannot get the sound right. The left channel sound 30% weaker than right channel. I checked the alignment (using Rega protractor) and tracking force (~1.9g) and I switched input for phono preamplifier and the sound problem did switch. So the problem is from turntable. Then I closely looked at the cantilever and noticed it is “bent” slightly inward. (Picture attached). Could any Ania owner help to confirm if it is bent or it is made in that way. (From stock picture , it is straight and right in the center) Thanks.
- ...
- 12 posts total
- 12 posts total