2. speakers
  3. 140038-121338

Does impedance of a speaker change when one bi-amps?

I'm fairly new to the audiophile arena and i have seen this question asked before, but not answered.
rickytickytwo
ramtubes's avatar
ramtubes
460 posts
 
@imhififan 

IMO, parametric equalizer pair with active crossover can make a huge improvement!


I like the crossover of course. Many audiophiles will shy away from the EQ.  I see no need in adding anything digital either.

One can easily select a crossover point simply from the response curves now available for all drivers. I still go to Madisound first. They appear to have everything with good documentation. 

If people want to start discussing how to select drivers I'm up for it. We might even have a serious conversation and get something done.

HiFi was once and experimenter's hobby. I hope to bring some of that back. 
bdp24's avatar
bdp24
9,700 posts
 

The most interesting loudspeaker product I am aware of is Roger’s new Music Reference ESL loudspeaker/dedicated direct-drive OTL amplifier combination (a great idea, though audiophiles don’t like to have their amp dictated to them ;-). ESL transparency, speed, lack of coloration (unsurpassed vocal and instrumental timbre, texture, etc.), and all the other ESL attributes (okay, I love ESL’s!), and no input (step up) transformer. And driven by a dedicated, direct-drive OTL amp (no output transformer, the tubes connected right to the ESL panels). What could be more pure?! A powered sub is included, and since not a single other power amp or other electronic component is required or necessary, you just feed the system the signal of your choice. The combined price is less than that of the multi-driver/complex-crossover monstrosities reviewed in Stereophile every month. I’m saving up for my pair ;-) .

There are companies making powered monitor loudspeakers for the pro sector (Westlake Audio, for one), but if you have heard any of them you know they aren’t exactly audiophile products, made for listening to music in the home. Sensitive and dynamic yes, but too colored, shouty, and coarse for me.

steve59's avatar
steve59
1,735 posts
 
WOW, you guys complicated that conversation.

My Integrated amp rated at 250/8-425/4 shut down driving my power hungry speakers that have 2 pair of binding posts on back they’re 4 way 6 ohm rated and manufacturer recommends 500 watts. My question for the experts assuming I can get the amps output levels matched is, Would my integrated be less likely to overheat at the same spl if I added a 2nd amp, removing the strap to horizontally bi amp the speakers? also if I got output levels matched would amps of identical power be necessary or could I wire a pair of 350 mono's to the bass of each speaker and use the int to drive the top end?
erik_squires
16,006 posts
 
Would my integrated be less likely to overheat at the same spl if I added a 2nd amp, removing the strap to horizontally bi amp the speakers?


Yes. Passive bi-amping would limit the current for the bass to only one of the two amps, therefore reducing the actual power drawn during the same musical performance as before.

also if I got output levels matched would amps of identical power be necessary


No

or could I wire a pair of 350 mono’s to the bass of each speaker and use the int to drive the top end?


Sure. An added advantage of this method is the ability to add EQ to the bass section alone, often a good improvement.

Best,
E

erik_squires
16,006 posts
 
If you are going to go with active crossovers, you seriously should just make your own speaker. DIY  your own speaker pair is something I think every audiophile should do at least once.

Build it from the ground up and learn what you need to do along the way, instead of this half baked approach.

For the record, almost all passive crossovers also include some form of EQ. If you plan to remove and replace a passive crossover you need to be prepared to do both.
And now I leave you guys to hack and play around.

Best,
E
More to discover