B&W 802 N vs. D


I apologize in advance since this is probably an old question, but can someone summarize for me the differences in the sound of the 802 N and 802 D? I am wondering if the D's are worth the extra $$ they go for.
diw
It is in his SUBJECTIVE opinion which is entirely valid for him but no one else.It seems to be the reason there is so much debate in audio.How can you say a $100K amp SOUNDS better than a $500 dollar one? Now,measurements are a different story as it falls under OBJECTIVE data.
Budt, correctomundo my friend! I have been very happy with an integrated amp after having spent $50K plus on seperates over the years. There are many paths to audio nirvana:O)
Is there anyone who have matched the EAD PM 8300 or 6300 with B&W 802N or 802D? These multi amplifiers deliver 300w/chanel @ 8Ohm. Please kindly give an advice. Thanks.
TPREAVES:

I just put an estimate percentage on the performance difference between the N & D series.

This thread started as is the D worth or that much better than the N series.

I aim a B&W guy & have really done a lot of reading/research on the speakers. I have also talked quite a bit with Eric McBride the tech. supervisior for B&W USA.

Since then the thread has evolved quite a bit.

KODG
Ok guys...I've sold B&W for more than a decade, the N's and the D's, and everything in between. Yes, the biggest difference IS the tweeter. And yes the D tweeter is night and day over the N version; the resonance is up near 80kHz as opposed to 30. The N tweeter sounds bright and edgy and has a distinct metallic ring to it, the D is much faster, far more neutral, and doesn't have any of that typical metal dome ring. It's by FAR the best attribute of the speaker, next to the pretty cabinets. The diamond tweeter is VERY fragile though, if you touch it even slightly it will crack and disintegrate, it's game over and over a grand to replace (retail). As far as the bass and mids, the mids are okay on both models, nothing to write home about, but whoever said the bass is tubby couldn't be more right. The woofers on both these models...no ALL B&Ws, IMO are crap. We had a brand new pair of 802Ds we put on the floor when they first came out, and within a half hour we blew 3 of 4 woofers...separated voice coils. They can't take any serious juice, they look like they're made of cardboard, and they sound like it too. I had 803Ds at home for a couple of years, only cause I bought them dirt cheap through B&W's salesperson program, and made 5 grand on them when I sold them. My wife at least put up with the look of the 803s, but if I had brought the "they look like robots" 802s home a divorce would have been imminent. Bottom line, I wouldn't touch B&Ws with a 10 foot pole again, unless I could buy them at 20 cents on the dollar, and that would be just to flip them for a good profit. Thanks for coming out.