Turntable /Cartridge hum

Thanks all for the responses.
I mostly fixed the fluttering problem to bare audibility by switching some electrical cables from the wall to a power conditioner.

orpheus 10,

The motor sounds like a solution, but I don’t think I’m handy enough to install it.
BTW, I also have the Rega TT PSU, if that has any bearing.

I said if you don't have the motor, you might already have it.  The PSU and the motor solve some of the same problems, both might be overkill; you're probably good like you are.

I'm glad you solved your problem; happy listening.

Anytime I've used conditioners, the sound was ruined.   Listen with and then without the condition and evaluate.  (forget the hum for now)

Rvpiano, I was rushed yesterday, and didn't have time to respond adequately. There are tweaks that will take the sound of your P3 to a whole higher level, I am going to list them, and you can do them as your time and budget will allow.

If you can solder, you should be able to handle that motor; as I recall, it's not too difficult.  What I was trying to say before, was that the motor and the PSU are recommended together, so if you bought your table used, you might already have the motor.

The incognito Rewire Kit for Rega Tonearms is highly recommended. It is difficult and you'll need to send your unit to "Galen Carol Audio"

"Groovetracer" Deluxe sub platter.

The "Heavy Weight" for your tonearm.


Those are the tweaks I recommend, and the only one you won't be able to do is tonearm rewire; tweaks work well for the Rega, if you see others that are specifically recommended for your turntable, try them.


Happy listening.

Orpheus 10,

Thanks for the tips.