Does a DAc that Reclocks Remove Jitter from Sonos Connect


I asked Wyred4Sound what the advantages would with their upgrade to my Sonos Connect given the external Reimyo  DAP-777 20BitK2 DAC and lossless streams that I use:

Response from Wyred4Sound:
“The Sonos digital output is rather jittery, the mod removes this jitter by reclocking the output from a buffer with far better timing. Based on your Reimyo DAP777 DAC, you might want to opt for the 44.1k modWhat you will find is more clarity, true timing on attack and decay, larger sound stage, etc.”

So ..After more research here is what I found about my Reimyo DAP-777 20bitK2 reclocking:
“For the past few years, JVC has been producing the exclusive Extended Definition Compact Disc (XRCD),using the company’s proprietary 20bitK2 A/D converter during recording, with the Digital K2 machine regenerating resultant clock signals for transferring to a magneto-optical disc. The 20-bit disc is then reconstituted again via JVC’s 20bitK2 D/A converter, then converted into a true 16-bit signal using the K2 Super Coding machine.
The Harmonix Reimyo DAP-777 DAC, incorporates the JVC 20bitK2 D/A converter IC."
Bottom Line: does the Sonos W4S mod add anything to what this DAC already does?

jefflz
It depends which DAC you have, as their ability to reduce jitter is all different. However, the $80 Grace SDAC to the $100 Schiit Magni 3 to the $250 SMSIL SU8 to the $1800 Benchmark DAC3B all have no issues reducing jitter to well below audible levels.
OP:
What he said.

It is very DAC dependent. I've had the Remedy and used it with a Squeezebox Touch.

With an ARC DAC 8 - There was a significant improvement
With the MyteK Brooklyn - Not noticeable.

Something else I noticed at the same time was that the DAC 8 plays hi resolution music much better than it plays redbook.

The Brooklyn plays both equally well.

So .... YMMV. Older DAC's, and Jitttery streamers are the best uses of a reclocker.

Best,
E