2. home-theater
  3. 1254614294

What is the best way to add a 5:1 system

Ok..totally new in this forum but not new to Mac equipment. Just got my first new system in 30 yrs.! MC 402, C46, MVP 871, 4 B&W speakers. Still using my MR77 tuner and an older turntable for present. Planning on picking up a sub soon as well. This has led me to consider setting myself up for some 5:1 down the road. I know I need a center speaker and 3 more channels of amplification, but not sure how best to integrate this with current set up. Any thoughts would be greatly appreciated. It was reading much of the discussion on this forum that led me to choose the new system.

regards to all
rroderick
jdodmead
257 posts
 
There are many, many threads on this. It's very easy to do, you just need to hook up the pre-outs from your HT processor or receiver for the front mains to an input on your pre amp.(except phono) If your pre has an HT pass through, that's even better. If not, all yiu need to do is make sure the level setting is the same whenever you use HT.(and when you calibrate the speaker levels)
You should also invest in a sound level meter, Radio Shack has them for around $30. This too me is a must have and I'm not as picky as many others

Jeff
bdgregory
1,712 posts
 
. . . what Jeff said. This is how I did it and it works great. It's also key that you choose a center channel speaker and amp matched to your mains. Likewise (but less so) for your surround speakers/amps.
rroderick OP
4 posts
 
Thanx much for the tips. It will be a while before this happens, but thought I would get a vision for it should look like. Sounds like I will need a processor and another amp with 3 channels, or would it be easier to have one amp for the 5:1 and the 402 strictly stereo? That is how most of my time is spent.

It sure is nice to be back into new listening. Am actually keeping all of my previous system for another location. Can't bear to part with it!
Ag insider logo xs@2x
dbphd
1,628 posts
 
Jeff,

I'm attracted to the notion of an Integra 9.9 processor for surround SACD via HDMI and newer codecs for films, but I'd still like to use my Proceed PAV/PDSD for stereo music. (Maybe the PDSD would be redundant.) Just to be explicit, are you saying I could take the pre-outs from the 9.9 to any unused input of the PAV? I assume the PAV (or PDSD) XLR outputs would still go to the Proceed Amp 2 for the front LR speakers, but the 9.9 XLR outputs would go to the Amp 3 for the center and surround speakers. Am I understanding you correctly?

db
More to discover