Correct me if I'm wrong but if using two runs off two breakers, make sure they are on the same phase or you could get noise. I used 8 gauge on a 20amp breaker.
AC Power Question
I am repositioning my system and need to install ac outlets. I assume its a good idea to have a dedicated circuit for my system below ( stereo only). Should i have 2 dedicated circuits? 15 or 20 amps? I may also have a power conditioner in the loop as well. Thanks in advance for any thoughts and advice on do's and don'ts....
CJ 16LSII preamp
Levinson 532H amp
BW 803D3
Roon Nucleus server
Mytek dac
SACD player
Basis turntable
Heed phono pre
Large screen TV
Apple TV
Cable box
WiFi router
CJ 16LSII preamp
Levinson 532H amp
BW 803D3
Roon Nucleus server
Mytek dac
SACD player
Basis turntable
Heed phono pre
Large screen TV
Apple TV
Cable box
WiFi router
- ...
- 36 posts total
noromance"if using two runs off two breakers, make sure they are on the same phase or you could get noise" That is myth, fiction, and misinformation there is no truth, validity, or basis for this claim where do you think the "noise" will come from! |
| Post removed |
@jea48 and @almarg are the experts on this subject. Hopefully one of them will join in. They advised me when installing my dedicated lines. I'm running my analogue and digital on separate dedicated 20 amp circuits into separate Hubble duplex receptacles. In my case, I have a subpanel for my audio lines. Both lines on the same leg with equal distribution of current draw from devices and appliances to the sevice panel. |
- 36 posts total