I support my cables with Faberge Eggs.
They run in the $12K - $15K range.
DeKay
They run in the $12K - $15K range.
DeKay
Speaker Cables and Carpet
mkgus I would guess that your carpet and rubber layers create a static charge in the speaker cables that are down there. You need to get them out of there and run them in the wall if you’re overly concerned with cosmetics or else just exposed but supported above the floor with any non conductive material. Your idea of running more speaker wire is not good; and if you did run more wire, you would have more electrical resistance, not less. Magic chickens are a last resort, and only result in defeat. |
While anything that raises the cables certainly will improve things, the very best solution is to use something specifically designed to prevent electric charges moving along the surface getting from the floor to your cables. There's a whole industry devoted to this exact subject so its no surprise the best performance by far is to use one of these insulators. Turns out there's a whole cottage industry of collectors so you can if you want hunt around and find some that you like. Or you could hunt around and find the manufacturer, which is what Cable Elevators seems to have done. Either way this is by far the best way to go. https://www.ebay.com/itm/2-Vintage-Ceramic-Porcelain-Insulators-Brown-White/183480810613?hash=item2a... The ones here are exactly the same as mine. Cable Elevators basically slaps a sticker on the side and a rubber foot on the base. Even at their inflated price they are well worth the money. |
All of the above is correct but will not exactly give the "cleaner look" you are after. One solution is to run the cables under the floor (assuming we are not talking a concrete slab). You can actually then get a nice drape and few if any points of contact. You will need nice solutions to get in and out of the floor of course -- suppliers to clean rooms and industrial facilities are helpful in this regard. I did something like this in my prior install https://systems.audiogon.com/systems/5111 |
Post removed |