If you want to get the best of your transport, try this.



http://www.symposiumusa.com/rollerblocks.html 

I had used these three roller blocks under CEC TL0x for 5 years about 15 years ago and now I am using them under Jay's Audio CDT2 Mk2.

There are two different balls. If you can afford, the super ball is recommended for more effect.

With these roller blocks, transport give higher resolution and sharper focus.

I think it's effect is more than good digital cables.

But I recommend combination of roller blocks and good digital cable to get the best of your transport.
128x128shkong78
I've tried about a dozen different isolation/vibration devices, mostly high end types.  
I use mostly Stillpoints under my tube equipment and isolation transformer.  Which Stillpoint model was dependent on the component and often the Ultra Minis were best.
I also use Stillpoints under my TV cable box (what a difference), Bluray player (for the audio) and under my ADS speakers used for a video system (tightens the bass and imaging).  
I use a Townsend Sink under my VPI TNT VI.  A MUST! (VPI TNT feet are wholly inadequate)
I used a buckwheat pillow under my EAR 324 phono pre when I used it.  Buckwheat pillows are also a CHEAP and EFFECTIVE alternative to all the mainstream isolation/vibration gear, even if it isn't 100% as good as some, it does a good job at low cost (but not aesthetically pleasing).

You must try Machina Dynamica Springs. I have them under everything except my speakers. They isolate in all 3 dimensions, and are inexpensive
If I remember correctly one member swears by full Del Monte Fruit cans. I don’t remember if orange slices were better than pineapple, but it seemed smart to start with four, in case you got hungry, you could still hold your equipment up with three.

BTW, I use some Steve Blinn footers, but it looks like Steve is out of business.
Of all the food groups the best is Spam. Not too soft, not too hard. Spam, the Miracle Meat!