2. misc-audio
  3. 1007412696

Tweak worth 100X It's price - Vibrapods

While I WAS not a big beleiver in the "tweaks" of audio to a any appreciable extent, I must rave about the performance recieved form these littel rubber pods. I purchase a few a couple months ago to place under my electronics and I was extremely happy with the result from the pods in combination with soem MDF particle board placed under the equipment pods combination. Rather than go into extreme use of adjectives regarding the improvement that was expereinced, just let me say that EVERYTHING opend up and became better. I thought my system sounded good but this little, cheap tweak was eye (ear?) opening.

I was extrememly happy with the imrovement to my electronics and then I thought - Why not the speakers also? I bought and installed pods for each speaker and
installed them. This was "as big" if not a bigger improvememnt to overall sound. I was experiencing some bass control problems around the real low end. These problems were now gone along with all the other distortion that I was experiencing and really not even knowing it or knowing it and blaming it on "room colorations".

You have just got to try these things. At $6.00 a pop you can't go wrong. Plus you can get a discount for quantity purchases usually. You will need a minimum of 4 per compopnent. $24.00 bucks that will make your system sound like you just put $2,400.00 into it.

I am a personal user and this is not an ad but I got my pods, along with a plethora of help from CJAudio/Video through this (AudiogoN) site. (www.cjsaudvid.com) Craig will take good care of you.

Feel free to email me (mackpat@apk.net) if you have any questions / comments.

I can also send you a picture of the stands i built for the speakers to incorporate the pods / and the Legacy supplied spikes if interested.

Relevant System Info:

Processor: Aragon Soundstage
Amp: Aragon 8008BB
Speakers: Legacy Classics.
CD: Denon 5 disc carousel.
Interconnects: HT ProSilway II (Pre - Amp)
Monster Coax Digital (II) (CD- Pre)
mackpat
sean
6,231 posts
 
Ernie, i agree and disagree. There are folks using Pods between the woofer and mid / tweeter section on VR-4's, supposedly with very good results. I could see how isolating the two sections MIGHT offer some benefit. Then again, i would think that sorbothane would work even better. Only problem is that it is WAY more expensive.

My Father has Pods in an MDF sandwich ( carpet / mdf / pods / mdf / speaker ) and has been having better results with bass definition and lack of boom. This may be due to the fact that his speakers have a downloaded woofer though. Doing this ( somewhat ) changes the loading characteristics that the driver sees. Only problem is that i've noticed that the speakers tend to lean and / or twist after a while, probably from vibrating itself off of the center of the platform. I'm sure that this affects the imaging, etc... Need to find another way to attack this problem. Sean
>
hdm
1,062 posts
 
Sean: interesting on your Dad's speakers. I also have speakers with a downloaded (or is that uploaded) woofer, and have had excellent results with vibrapods (my speakers are floorstanders that weigh about 45 lbs. each). I have a suspended wood floor with a low pile berber carpet. Here's a suggestion for your Dad: have him buy two pieces of laminated or security glass (very dead and does not ring-two pieces will cost him about $40 max) slightly larger than the footprint of his speakers then go: carpet/glass/pods/speakers. I have had no twisting or leaning issues this way and the speaker will also be less raised off the floor than with his MDF sandwich. For what it's worth, I use a one number higher pod at the front corners of the speakers than I do at the back as most of the weight internally is closer to the front of the speaker.
Ernie: here's a cheap ($25) experiment for you. Play a piece of music at relatively high levels with your speakers spiked. Place your hand on the top of the speaker cabinet. Take the spikes off and put the proper pods under the speakers. Play the same piece of music at the same level/put your hand on top of the speaker cabinet. Presto: Much less vibration! You can bet your life if the cabinet is vibrating, all the drivers are too. In my setup definitely sounds better too.
trelja
3,224 posts
 
Thanks for the inquiries.

I am still around, and doing very well. Work around the home is progressing nicely. Last week was a critical point in phase one, and turned out much better than even hoped. It did require a lot of work, moving things around, etc. My electronics were put in a closet, which was painful. They should reemerge in another week or so.

A new listening room will now house the system. After giving things time to break-in, I will evaluate an audiophile power outlet.

Then, I will go bother my friend Mike Leshner of The Stereo Trading Outlet(local dealer) for a home audition of the PS Audio Ultimate Outlet(high current version) which was raved about in the current Stereophile. Maybe I will submit a personal review of the product. I am hoping it does even a small amount of what Stereophile claims, because if that is the case, it won't be going back. I will get Mike's opinions first. He is a no BS guy, and will tell me flat out whether he thinks the product is the real thing, or just a pretender. Believe me, he thinks a lot of the stuff that comes across his path is not so hot. The fact that he carries so much used stuff allows him to bypass the loyalties a dealer representing a brand would have. He eventually has most things come through, and is fairly objective. His opinions are always interesting and welcome.

My apologies for veering off the topic of this thread, I agree that the Vibrapods are quite special, at least worth a try to most anyone who visits this site, and perhaps one of the biggest bargains in audio.

Take care everyone, Joe Trelli
Ag insider logo xs@2x
drubin
3,275 posts
 
In my experience, Vibrapods leave a residue on whatever they are in contact with, like a shelf or a component. How are people dealing with this annoyance?
bob_bundus
1,834 posts
 
any household cleaning spray & paper towel seems to remove that oily Vibrapod residue effectively with no artifacts
More to discover